CircuPool RJ-20 PLUS Salt Chlorine Generator Q&A
Activity timeframe
-
Ok for 20K gal I ground vinyl pool in Olymouth MA? View answer
Answer posted 8 months ago
Will this work and hook up to a above ground pool ? View answer
Answer posted 1 year ago
Are there any compatibility problems replacing a Hayward Aquarite W3AQR3? View answer
Answer posted 1 year ago
I have the CircuPool Universal25 system and it's getting pretty old. The xxxx to control the chlorine production does not stay on the number it is set at and it's nearly impossible to select a number as it is too sensitive to movement. I'm considering upgrading to the RJ-20 system and wanted to know if the salt cell will fit into the plumbing connections I have in place for the Universal cell?? View answer
Answer posted 3 years ago
I have the CircuPool Universal25 system and it's getting pretty old. The xxxx to control the chlorine production does not stay on the number it is set at and it's nearly impossible to select a number as it is too sensitive to movement. I'm considering upgrading to the RJ-20 system and wanted to know if the salt cell will fit into the plumbing connections I have in place for the Universal cell?? View answer
Answer posted 3 years ago
What are the minimum and recommended flow rates in GPM for proper operation of the chlorine generator? What are the power draw of the RJ-20+ and RJ-30+ at 20%, 50% and 100%?I'll be running my system on solar and want to make sure I have enough solar capacity before I purchase. View answer
Answer posted 3 years ago
need to replace circuit board how do I go about getting one rj series control box View answer
Answer posted 4 years ago
I do not have a pool heater. Do I still need a check valve between the salt cell and the filter? View answer
Answer posted 4 years ago
I have a above ground splash pool 10,000 gal. SGS Breeze 320 is barely working & need to replace it. I have a Hayward pump we replaced 6 months ago. The CircuPool RJ Plus series the 16 or the 30? Is either compatible with my pump? Or any other recommendations for a new system? View answer
Answer posted 5 years ago
Will this work with the aquapro 190 cartridge filter system View answer
Answer posted 5 years ago
I have 1.5” pipework - will this fit? View answer
Answer posted 5 years ago
What is the length of the pipe I will need to cut out of my existing line View answer
Answer posted 5 years ago
can this be used for an above ground pool ? View answer
Answer posted 7 years ago
So when the time clock and pool are off, the control module shuts off too?Also my control module is mounted in direct sunlight and exposed to weather. Is the self contain unit ok or need to be in an additional inclosure?If I double the pool gallons to select the size of the generator is this enough? View answer
Answer posted 8 years ago
You show a vertical install kit for the cell. Does the cell have to be installed vertically? View answer
Answer posted 8 years ago
