APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons Q&A

Question 1

The flow switch has failed on my IC 40 before. Can the flow switch be replaced on this unit, and do you carry the part? View answer

Asked 5 ´years ago

Question 2

can this replace my intellichior 20 the after market 40 View answer

Asked 3 ´years ago

Question 3

My question is regarding below note. I’ve Intellitouch system, does it mean this Salt cell will not work with it? I’d like the cell to turn on automatically per the set schedules in Intellitouch system.Note: The generic IntelliChlor cell does not utilize a RS-485 or data connection for integration with automation systems like Pentair Intellitouch, Pentair Easy Touch®, Jandy® AquaLink®, Hayward® AquaLogic® and Hayward ProLogic® View answer

Asked 2 ´years ago

Question 4

How long is the power cable on this unit? View answer

Asked 4 ´years ago

Question 5

I currently have a Pentair iChlor30 and will be replacing it in the near future. Will the intelichlor ic40 work with my current Pentair power box hookup? View answer

Asked 9 ´months ago

Question 6

what is the flow direction in and out View answer

Asked 4 ´years ago

Question 7

I am going to use this salt cell to replace my Ichlor 30. Will this come with an install template?? View answer

Asked 9 ´months ago

Question 8

Does this generic cell also substitute for the Pentair IC20? View answer

Asked 5 ´years ago

Question 9

If this APX cell goes bad in the future can I just replace the cell and not the control module? View answer

Asked 8 ´months ago

Question 10

My current IC-40 board in the control panel is partly out (~$240). I do have power to the cell and the lights on the cell are working. However, the salt levels are not being displayed on the control panel. Would this control board need to be repaired to use this salt cell? View answer

Asked 5 ´years ago

Question 11

Will this replace the Pentair 520554 IntelliChlor IC20 Salt Chlorine Generator Cell (US Version) View answer

Asked 5 ´years ago

Question 12

When you say, "it does not communicate with external controllers", to operate it, you manually push the buttons correct? I cannot use the Pentair Easytouch remote to operate it. View answer

Asked 3 ´years ago

Question 13

I have an old Goldline/AquaRite T-Cell system (firmware is r1.09). Is this a drop-in replacement for that (same dimensions)? View answer

Asked 6 ´years ago

Question 14

If I have a P40 and the cell reaches its end of life, I just need to buy the APX PERFORMANCE P-Series Inner Replacement Cell for the P40 (Housing and Electrode Only) , correct? View answer

Asked 11 ´months ago

Question 15

Do I need a power box or can I just buy this unit and plumb it in? I don't currently have a salt generator. View answer

Asked 1 ´year ago

Question 16

Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer

Asked 4 ´years ago

Question 17

Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer

Asked 4 ´years ago

Question 18

My Pentair Intellichlor salt chlorine generator model 40 is not working I have spent over $500 in chemicals the last month it’s not producing it’s chlorine but I do not know the difference between a cell and a generator which one do I need the generator or the cell? Are they the same? Thank you for your help. View answer

Asked 9 ´months ago

Question 19

We have a IC15. will your IC40 fits in our space and how much more ac power would it need per year? View answer

Asked 5 ´months ago

Question 20

I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says ""inspect cell"". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer

Asked 2 ´years ago

Question 21

Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer

Asked 4 ´years ago

Question 22

Is the IC60 the same size as the IC 40? View answer

Asked 26 ´days ago

Question 23

Why do I get a com link error on the Pentair control panel? It is not reading the salt level. View answer

Asked 7 ´months ago

Question 24

When you say, ""it does not communicate with external controllers"", to operate it, you manually push the buttons correct? I cannot use the Pentair Easytouch remote to operate it. View answer

Asked 3 ´years ago

Question 25

The power supply for my Ic40 is inside the easytouch system. Does the P40 connect the same way? The easytouch controls when the system shuts on and off. How is this handled with the p40? Is there a freeze guard? View answer

Asked 1 ´year ago

Question 26

Can I turn the control panel both ways? My current Pentair panel must be installed upside down due to the flow. View answer

Asked 1 ´year ago

Question 27

How quickly would I receive it if I ordered today? View answer

Asked 1 ´year ago

Question 28

Will the power box for my Intelichlor I40 work with the Replacement Cell for Intelichlor 40 Generic upgrade? View answer

Asked 6 ´years ago

Question 29

Who provides the warranty service on this item? If I buy it and need warranty service do I go through the manufacturer or through DSP.com? View answer

Asked 6 ´years ago

Question 30

Can I use this cell for a 10,000 gallon pool? View answer

Asked 2 ´years ago

Question 31

Will this cell work with the Pentair Ichlor 30? View answer

Asked 2 ´years ago

Question 32

Can I replace the Flow sensor only on the cell O can’t seem to find it anywhere. View answer

Asked 2 ´years ago

Question 33

I’m trying to replace a Pentair Ichlor30. Can this be a replacement and compatible with my power center? View answer

Asked 3 ´years ago

Question 34

Will this work with the Pentair EasyTouch system and Wi-Fi bridge for my phone? View answer

Asked 3 ´years ago

Question 35

Can this be used to replace a Pentair IC30 and still use the existing power cell? View answer

Asked 3 ´years ago

Question 36

Can I use this to replace an IC15 which, in my opinion, was not big enough for our system? View answer

Asked 3 ´years ago

Question 37

Can I plug this into the pentair easy touch panel? Will it have enough power to run this ? View answer

Asked 6 ´years ago

Question 38

Is this compatible with pentair intellichlor 30 zr? View answer

Asked 3 ´years ago

Question 39

Is the manual available on line so I can look at it now? View answer

Asked 6 ´years ago

Question 40

if I install the unit with the flow I have,I will be reading it upside down is there an easy fix? View answer

Asked 6 ´years ago

Question 41

can I adjust the temp and salt readings on the unit View answer

Asked 4 ´years ago

Question 42

How many operational hours can I expect this to last? I understand the Pentair has a 10,000 hour life. View answer

Asked 3 ´years ago

Question 43

Any wiring needed to replace a standard IC40 with this unit to a pentair control panel? View answer

Asked 6 ´years ago

Question 44

Does this unit have the 24 hour 'Boost' option like the pentair IC40? View answer

Asked 3 ´years ago

Question 45

I have 20,000 gal pool, is there a reason why I have a ic40 Pentair salt generator? I really like the generic Pentair salt generator View answer

Asked 5 ´years ago

Question 46

does the chlorinator need to be installed under a roof, or can it handle the weather? View answer

Asked 4 ´years ago

Question 47

Does this cell need to be installed vertically like the Pentair Intellichlor cell? View answer

Asked 5 ´years ago

Question 48

Hello, I’m in the pool business and replace several of these a year. Can I buy this wholesale? View answer

Asked 4 ´years ago

Question 49

The installation manual says to mount horizontally on page 12 and vertically on 21. Which is it? On my original piping, mounting vertically puts the unit upside down. View answer

Asked 4 ´years ago

Question 50

does this have a self cleaning feature? View answer

Asked 6 ´years ago

APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic

Tools