Question 1

I purchased a Circupool UL40 Salt generator to replace an old Hayward. I guess I never noticed it before but the control unit is very warm if not hot to the touch. I do not smell burning wires and no breakers or fuses have been tripped. Unit is wired directly into a pool timer so it runs only 9 hours a day. Digital display says everything is within proper operating parameters. Can anyone tell me if the heat issue is normal? View answer

Asked 5 ´years ago | CircuPool UL40 Replacement Cell

Question 2

does circupool 55 need to be removed when winterizing View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 3

My pool is approximately 17,800 gallons. Will a 3 cell breeze salt cell be enough to take care of chlorinating my pool? View answer

Asked 5 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 4

when and if the cell goes bad do you just replaes the cell or the whole unit? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 5

I recently purchased a house with an inground pool that is approximately 10 to 11,000 gallons. I want to convert it from chlorine to a saltwater system and am decided to go with the circu pool core 35 system. My question is does the salt system go in place of where my chlorine feeder is now? Any info would be appreciated as I plan on installing myself and do not want to damage anything. I can also include a picture however it will not let me upload it in this question section. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 6

does it test phosphate levels View answer

Asked 5 ´years ago | Digital Pool Testers > SafeDip 6 in 1 Electronic Water Tester

Question 7

I am building an 80,000 gallon in-ground pool.What size generator(s) should I use and what configuration? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 8

Is the SJ-20 Series run on 110Volts? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 9

have INTEX pool has a#11374 .titanium electrode.can""t find a replacement.anything compatable. View answer

Asked 5 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 10

have INTEX pool has a#11374 .titanium electrode.can"t find a replacement.anything compatable. View answer

Asked 5 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 11

Customer's lights on the main unit have gone out even though power is on? Any suggestions to indicate equipment is still working? Thanks View answer

Asked 5 ´years ago | Salt Chlorinators > CMP Powerclean Salt Ultra 320 Salt Chlorinator (SGS Saline Generating Systems Breeze 320) | 52000-220-000

Question 12

What size motor frame (48 or 56) is used for the 1.5 HP Smartflo variable speed pump? View answer

Asked 5 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 13

Hi, I currently have a Circupool RJ-45 installed as my chlorinator that I purchased from you five years ago*. Will a new unit's cell be an exact replacement fit? Thanks, Kert View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 14

I have a CircuPool Universal40 Salt Chlorine Generator system that I purchased in May of 2020. I just did my 3 month acid bath cell maintenance and removed all visible buildup but my Cell maintenance light is still blinking. There is proper water flow and control panel is reading approx 4.8 on cell and salt level is 3500. The manual says make sure the control module is set to the right cell version setting but how do I know what that system setting is? View answer

Asked 5 ´years ago | CircuPool UL40 Replacement Cell

Question 15

Are the power centers matched to the cells? In other words, if I buy an RJ 30 Plus, can I upgrade the cell in the future with an RJ 45 Plus cell for example? View answer

Asked 5 ´years ago | Salt Cells > CircuPool® RJ-45 PLUS Replacement Cell

Question 16

1. Is there a minimum flow value for the T-9 - gpm, cfs?2. What is the acceptable pressure range for the T-9 View answer

Asked 5 ´years ago | Salt Chlorinators > Hayward Aqua Rite W3 AQR9 (W3 T-Cell-9) Salt Chlorine Generator

Question 17

How do you use it and whats the maintenance like? View answer

Asked 5 ´years ago | UV Sanitizers > CMP Wave UV-C 50 Ultraviolet Sanitizer System for Residential Pools

Question 18

I need the Union nut that fits on this tail piece. Does the Nut come with this part? View answer

Asked 5 ´years ago | Parts > Replacement Union - RJ Classic Models

Question 19

Will this union set fit a RJ Classic Cell Housing? View answer

Asked 5 ´years ago | CircuPool CORE 2-in Union Set (Collar, Union, O-Ring)

Question 20

I have an above ground pool with 9000 gallons of water. 12x24x52 above ground. I am looking to purchase the core -35. Is this going to be to much for this size of pool? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 21

Does this work inline vertically? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 22

My current IC-40 board in the control panel is partly out (~$240). I do have power to the cell and the lights on the cell are working. However, the salt levels are not being displayed on the control panel. Would this control board need to be repaired to use this salt cell? View answer

Asked 5 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 23

I have a Pentair Intlliconnect controlling my existing devices. Will I still be able to use it with the RJ-20 or 30 View answer

Asked 5 ´years ago | CircuPool RJ-20 PLUS Salt Chlorine Generator

Question 24

Yes I was wondering if this would fit a SJ-30 series. Current housing has developed a crack View answer

Asked 5 ´years ago | Parts > CircuPool Clear Housing for RJ Classic

Question 25

I have always ran my pump 100% of the time and my pentair ic40 just went out after 7 years. As long as I set the salt generator correctly is it ok if I run my pool pump continuously View answer

Asked 5 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 26

Silly question. This pump says Salt water pump. Will it work with a regular chlorine pool? View answer

Asked 5 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 27

There are times I notice the digital tester reads low chlorine, but a chemical test shows my CL is in range. What does this mean, is there a problem? View answer

Asked 5 ´years ago | Digital Pool Testers > SafeDip 6 in 1 Electronic Water Tester

Question 28

Does the CO2 used adversely effect the atmosphere? View answer

Asked 5 ´years ago | pH Control > CircuPool TOTALBalance pH Control System with Patented CO2 Infusion | Acid-Free

Question 29

How do you clean the cell? View answer

Asked 5 ´years ago

Question 30

The flow switch has failed on my IC 40 before. Can the flow switch be replaced on this unit, and do you carry the part? View answer

Asked 5 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 31

Can this be a replacement for compu pool cpcs24 View answer

Asked 5 ´years ago | Salt Chlorinators > CMP Powerclean Salt Ultra 320 Salt Chlorinator (SGS Saline Generating Systems Breeze 320) | 52000-220-000

Question 32

What fuse type (model number etc) does this use? Need a replacement. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 33

I currently have an AquaRite system, will the edge 40 cell fit where my t-15 cell is or does it have to be modified? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 34

I have had Aqua Rite Goldline for 17 years now - it does seem to be working so I need to replace it - do you have a model that is compatible for me to replace it with? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 35

The generator has a stated 7000 hour life. At continuous run, that is approx 291 days of operation. Makes it somewhat expensive if you have to replace the system every 10 months. How much is the generator by itself? View answer

Asked 5 ´years ago | For Spas / Hot Tubs > ControlOMatic - ChlorMaker Spa Chlorine Generator

Question 36

Is your cell compatible with the Crystal Pure PL7700? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 37

If the controller is not supposed to be used under 32* outside temperature....does this mean we could not use the hot tub in the winter here in Minnesota and would have to bring it indoors? View answer

Asked 5 ´years ago | For Spas / Hot Tubs > ControlOMatic - ChlorMaker Spa Chlorine Generator

Question 38

What size inground pool will this unit handle View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 39

Does the 24 model work in place of the 16 model View answer

Asked 5 ´years ago | Salt Cells > APX PERFORMANCE C4 Aftermarket Replacement Cell fits CompuPool CPSC-16 | up to 16,000 gallons

Question 40

I have an Intex saltwater chlorinator. Believe the cells are gone after only 3 months. Would you have a replacement or something compatible? View answer

Asked 5 ´years ago | Parts > CircuPool SJ - Hayward®/Pentair® Cell Adapter Kit

Question 41

I have a above ground splash pool 10,000 gal. SGS Breeze 320 is barely working & need to replace it. I have a Hayward pump we replaced 6 months ago. The CircuPool RJ Plus series the 16 or the 30? Is either compatible with my pump? Or any other recommendations for a new system? View answer

Asked 5 ´years ago | CircuPool RJ-20 PLUS Salt Chlorine Generator

Question 42

Can the Core system be installed on a pipe vertically or should it only be installed horizontally? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 43

when ordering a replacement cell do i need to get the one with the wire on it? I see they sell them with the connecting wire and without. View answer

Asked 5 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 44

if i currently have a t-9 cell can i replace it with a t 15 cell View answer

Asked 5 ´years ago | Salt Cells > Replacement W3 T-CELL-15 Turbo Cell for Hayward® AquaRite® (AQR15)

Question 45

Will this replace the Pentair 520554 IntelliChlor IC20 Salt Chlorine Generator Cell (US Version) View answer

Asked 5 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 46

Will a intex 1103 cell fit this houing View answer

Asked 5 ´years ago | Parts > CircuPool Clear Housing for RJ Classic

Question 47

My RJ-30 continue to say that it has a water fault. I have cleaned the cells and my local pool company says that my water is balanced but I have no clorine. What can I do? ps I have a vinyl liner pool View answer

Asked 5 ´years ago | Salt Cells > CircuPool RJ30 Classic Replacement Cell (Electrode Only)

Question 48

What is the center to center of the upright pipes without the elbows? I have a compu pool generator with the 4 1/2"" center to center and no room to cut the pipes and redo them View answer

Asked 5 ´years ago | Parts > CircuPool Vertical Installation Kit

Question 49

What is the center to center of the upright pipes without the elbows?I have a compu pool generator with the 4 1/2" center to center and no room to cut the pipes and redo them View answer

Asked 5 ´years ago | Parts > CircuPool Vertical Installation Kit

Question 50

where do I add the salt View answer

Asked 5 ´years ago | Salt Chlorinators > Hayward Aqua Rite W3 AQR3 (W3 T-Cell-3) Salt Chlorine Generator

Browse by Topic

Tools