APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons Q&A

Question 1

The flow switch has failed on my IC 40 before. Can the flow switch be replaced on this unit (APX P40/P20/P60), and do you carry the part? View answer

Asked 6 ´years ago

Question 2

Does the APX P60 / P40 / P20 replacement cell connect to Pentair ScreenLogic systems? View answer

Asked 2 ´months ago

Question 3

How do I know when to put salt in when using a APX PERFORMANCE p20 or p40 or p60 replacement cell? View answer

Asked 20 ´days ago

Question 4

Does the APX P40 cell come with the power cord that fits into the Pentair system? View answer

Asked 3 ´months ago

Question 5

Can this cell be mounted vertically with the flow going down View answer

Asked 2 ´months ago

Question 6

Do you offer a military discount?

Asked 4 ´months ago

Question 7

I have an IChlor 30 and would like to replace it with this unit.Will it be a direct fit replacement? View answer

Asked 4 ´years ago

Question 8

Can the APX p-cell turn upside down for flow attachment? View answer

Asked 1 ´month ago

Question 9

Can your Pentair IC40 replacement cell be installed vertically? Is there an advantage or disadvantage to doing so? View answer

Asked 1 ´year ago

Question 10

The installation manual says to mount horizontally on page 12 and vertically on 21. Which is it? On my original piping, mounting vertically puts the unit upside down. View answer

Asked 5 ´years ago

Question 11

Does it have Ability to communicate with EasyTouch Automation Systems? View answer

Asked 6 ´months ago

Question 12

I have an existing Ichlor 30 salt generator. Would this APX P40 cell be a direct replacement ? View answers

Asked 8 ´months ago

Question 13

I’m trying to replace a Pentair Ichlor30. Can this be a replacement and compatible with my power center? View answer

Asked 3 ´years ago

Question 14

Will this generator fit my 4 pin pentair connection View answer

Asked 5 ´months ago

Question 15

What is the warranty on the APEX P40? View answer

Asked 2 ´months ago

Question 16

is this a direct fit as far as the size of the unit View answer

Asked 6 ´months ago

Question 17

Is the IC60 the same size as the IC 40? View answer

Asked 7 ´months ago

Question 18

Do I have to change or adjust the couplers on the piping or is it an exact fit? View answer

Asked 2 ´months ago

Question 19

What is comparable to pentair ic40 View answer

Asked 3 ´months ago

Question 20

Can this be used to replace a Pentair IC30 and still use the existing power cell? View answer

Asked 4 ´years ago

Question 21

how long is the APX PERFORMANCE P40 Aftermarket Replacement Cell? View answer

Asked 13 ´days ago

Question 22

Why do you think your generic unit is better than the Pentair ic40?tks View answer

Asked 6 ´years ago

Question 23

I have an older pentair ichlor 30 which is no longer made. will the Apex P40 chlorinator replace and fit ? View answer

Asked 1 ´month ago

Question 24

Will this display the readings on the intellichore View answer

Asked 5 ´days ago

Question 25

If my APX P40 cell has a black screen is it bad? I’ve checked breaker and power supply and both are fine? View answer

Asked 2 ´months ago

Question 26

I have an Ichlor 30- can I use the aftermarket View answer

Asked 2 ´months ago

Question 27

Does the APX P-Cell tell you the specific salinity level or only if salinity is within range? View answer

Asked 3 ´months ago | Support

Question 28

My Pentair Intellichlor salt chlorine generator model 40 is not working I have spent over $500 in chemicals the last month it’s not producing it’s chlorine but I do not know the difference between a cell and a generator which one do I need the generator or the cell? Are they the same? Thank you for your help. View answer

Asked 1 ´year ago

Question 29

It looks like the unit is separated into 2 parts, the electronics and the cell. If I buy this unit, and it eventually fails, can I just replace the cell itself. How much is just the replacement cell? View answer

Asked 1 ´year ago

Question 30

Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer

Asked 5 ´years ago

Question 31

Will this work on a pentair pp40dc power pack View answer

Asked 5 ´months ago

Question 32

Will this work with my ic 15 power pack View answer

Asked 5 ´months ago

Question 33

To clean plates, do you remove top section panel each time View answer

Asked 5 ´months ago

Question 34

what are the dimensions of this unit? View answer

Asked 5 ´months ago

Question 35

Will I have to modify the plumbing to use this item? View answer

Asked 4 ´months ago

Question 36

Is there a way to adjust the LCD screen's view angle? It's only readable when my eyes are level with it. View answer

Asked 4 ´months ago

Question 37

How long does it take for the system to check the water flow after installation?

Asked 4 ´months ago

Question 38

Why do I get a com link error on the Pentair control panel? It is not reading the salt level. View answer

Asked 1 ´year ago

Question 39

I have an IC30 that failed and my pool is 17k gals. Will the P20 be enough and will it be direct replacement View answer

Asked 3 ´months ago

Question 40

If this APX cell goes bad in the future can I just replace the cell and not the control module? View answer

Asked 1 ´year ago

Question 41

I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says ""inspect cell"". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer

Asked 2 ´years ago

Question 42

Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer

Asked 5 ´years ago

Question 43

How to clean cells View answer

Asked 3 ´months ago

Question 44

What is the return policy? What is the warranty length?Thank you View answer

Asked 5 ´years ago

Question 45

I have the APX P40, where is the water temperature sensor sensor? In flow switch or in the cell? View answer

Asked 6 ´months ago

Question 46

can i use my old transformer View answer

Asked 5 ´months ago

Question 47

What are the dimensions of the p40? I am replacing an IC30, and i see there is no direct replacement, so i need to make sure i have room in my plumbing to fit this. thanks View answer

Asked 1 ´year ago

Question 48

Do customers have any issues with only being able to adjust output in 10% increments? I typically adjust my intellichlor up/down in smaller increments. View answer

Asked 1 ´year ago

Question 49

How quickly would I receive it if I ordered today? View answer

Asked 2 ´years ago

Question 50

I have an 18000 gallon pool. What size salt cell to replace my third bad Pentair ic30 View answer

Asked 4 ´months ago

APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic

Tools