Question 1

I bought the phosphate test strip kit from you. I says I need to dip strip in a vial and compare water color change to card for phosphate level. What vial? There was none in kit and there is no reference to vial size in documentation. Without it strips are useless...help!! View answer

Asked 3 ´years ago | Parts > Convenience Kit - Value Pack

Question 2

Looking at the the RJ 60 salt system, my pool is an 18x36 around 36000 gal. Is the system an over kill or will run less often? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 3

Can the complete RJ-45 Plus System replace my current complete Si+ 45 System (Control Panel, Flow Sensor, Cell) WITHOUT cutting, gluing, retrofit any electrical connections, require professional installation? In other words, will the RJ-45 Plus Complete System be an easy Plug and Play to my existing system? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 4

Does the sj-40 have the same number of titanium plates as the sj-55 View answer

Asked 3 ´years ago | Salt Cells > CircuPool® SJ-40 Classic Replacement Salt Cell

Question 5

Can I add a flow switch to a sj 20 ,first gen . View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 6

What is the cell type code that should be displayed in the control box for the Si45. View answer

Asked 3 ´years ago | CircuPool® Si-45 Replacement Salt Cell

Question 7

which direction to hook up the cell View answer

Asked 3 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 8

WILL SJ20 POWER HEAD POWER THE SJ45 View answer

Asked 3 ´years ago | CircuPool SJ-45 Salt Chlorine Generator

Question 9

Does this work with any automation systems, such as Pentair IntelliConnect? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 10

I am having my pool Replastered 32k Inground next few months. Currently use chlorine tabs. I use city water so after Cleaning my filter and putting in new sand will it be ok to just start it up normally and then test the water ? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 11

I’m trying to replace a Pentair Ichlor30. Can this be a replacement and compatible with my power center? View answer

Asked 3 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 12

What is the min recommended flow rate? I just had a VSP installed and want to be sure we keep flow rate at correct operating flow or above. View answer

Asked 3 ´years ago | Salt Cells > Optimum® Simple Cell for T15 Replacement cell fits Hayward® Aqua Rite® T-CELL-15® | up to 40,000 gallons

Question 13

Will this fit Hayward T15, 40k gallon cell? View answer

Asked 3 ´years ago | Parts > Convenience Kit - Value Pack

Question 14

will this fit my existing union connectors that were connected to my hayward cell? View answer

Asked 3 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 15

Will the motor shut off if the water supply is blocked or not pumping due to low water level? View answer

Asked 3 ´years ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 16

Is the cleaning stand for the I 60 salt generator? View answer

Asked 3 ´years ago | Parts > Cleaning Stand (fits Pentair® IntelliChlor® Salt Systems)

Question 17

Is there a 2” bypass fitting for Circupool Core 55. I was thinking about removing it he chlorinator for the winter. View answer

Asked 3 ´years ago | Parts > Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)

Question 18

will it replace a Pentair salt generator ? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 19

How long is the dummy cell? View answer

Asked 3 ´years ago | Parts > Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)

Question 20

How can I tell if I have a sj45 or sj55. View answer

Asked 3 ´years ago | Salt Cells > CircuPool® SJ-55 Classic Replacement Salt Cell

Question 21

Is there a way to recalibrate the temperature sensor? My pool waterheater and pool thermometer both indicate that the pool is at 69 degrees F. But the readout on my RJ-60+ shows the water temp. to be around 50 deg F. As a result, the RJ-60+ is not generating any chlorine. It says that the temp. Is too low. Is there anything that I can do to correct the discrepancy in temperature. Charles View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 22

How long is the item? View answer

Asked 3 ´years ago | Parts > Bypass Cell (fits Pentair® IntelliChlor® Salt Systems)

Question 23

Will this dummy cell fit my IC20 View answer

Asked 3 ´years ago | Parts > Bypass Cell (fits Pentair® IntelliChlor® Salt Systems)

Question 24

Will this work with the Pentair EasyTouch system and Wi-Fi bridge for my phone? View answer

Asked 3 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 25

Are the 10,000 hours the running time hours or the chlorine making hours because it does not make chlorine in the cold weather. Is there paperwork explaining error codes?What Is limited in the warranty? View answer

Asked 3 ´years ago | APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 26

Can this be put in line with the pump on a timer? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 27

I have a Hayward AquaTroll that I did the "J4 jumper hack". Will this cell work? View answer

Asked 3 ´years ago | Salt Cells > Optimum® Simple Cell for T15 Replacement cell fits Hayward® Aqua Rite® T-CELL-15® | up to 40,000 gallons

Question 28

Is it possible to purchase a threaded cell collar for the CORE35? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 29

The red ""salt level"" light is blinking and the display message on the controller says ""WARNING: ADD WATER"" The unit will not generate chlorine. My salt level is fine and my pool chemistry is perfect, but I am having to manually add chlorine. I cannot find anything about this error in the owners manual or online. View answer

Asked 3 ´years ago | APX PERFORMANCE P40 Complete Salt Chlorine Generator

Question 30

I own an CircuPool Rj 20 (RJ20NR) that I purchased from your company on 6/5/2017 order# DSP-31637. I am looking for a replacement cell and wanted to male sure that I order the correct replacement. Is the RJ20C-RC-4Y the direct correct replacement for the housing I have? Thank you in advance for your reply. View answer

Asked 3 ´years ago | Salt Cells > CircuPool RJ20/AG16 Classic Replacement Cell (Electrode Only)

Question 31

Can you add hose to purge end? View answer

Asked 3 ´years ago | Filters > CircuPool TJ-16 "Typhoon" Centrifugal Pre-Filter

Question 32

Will this work with Pentair Easy touch control? View answer

Asked 3 ´years ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 3.0 THP

Question 33

Can this be installed AFTER the salt chlorinator to filter out the calcium (I assume) that comes off the plates? This calcium ends up in the pool as white pieces that settle to the bottom. View answer

Asked 3 ´years ago | Filters > CircuPool TJ-16 "Typhoon" Centrifugal Pre-Filter

Question 34

Is there an upright installation kit for an series View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 35

Our pool uses a Bestway 58498E sand filter that has flexible hoses ( i believe 1 1/4"") instead of pvc pipe. Do you have an adapter kit that will work with this and the RJ or SJ45? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 36

Can this be used to replace a Pentair IC30 and still use the existing power cell? View answer

Asked 3 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 37

Is the waterco cc150 in stock? View answer

Asked 3 ´years ago | Filters > Waterco CC150 Trimline Slim Cartridge Filter - 150 Sq. Ft.

Question 38

Is this compatible with AQRS340 for a Hayward Aquarite S3 unit? View answer

Asked 3 ´years ago | Parts > Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)

Question 39

Can this system be used with the Pentair EasyTouch 8SC control system? View answer

Asked 3 ´years ago | Packages > Ultimate Combo (Large Pools) - (RJ-45 PLUS Salt System, SmartFlo® 3.0 VS Pump, CJ2750 Filter, and TJ-16 Pre-Filter)

Question 40

I run my pump 7 to 8 hrs a day, does this system once is on does it turn off by itself? And on by itselft? I am planning on connecting it to separate electricity source 110vThanks View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool EDGE-25 Salt Chlorine Generator

Question 41

I currently have an RJ 20 plus that has performed well in my 16,000 gallon pool. The cell has now gone bad and needs replacing. Is there a benefit to upgrading to the RJ 30 plus cell and is it compatible with my old control unit? View answer

Asked 3 ´years ago | CircuPool RJ-20 PLUS Salt Chlorine Generator

Question 42

How can I register my Hayward salt system . My pool company has never given me the Manuel and my pool is paid in full . View answer

Asked 3 ´years ago | Salt Chlorinators > Hayward Aqua Rite W3 AQR9 (W3 T-Cell-9) Salt Chlorine Generator

Question 43

Are the cells dimensions compatible with replacement of a Autopilot Dig-220's without replumbing? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 44

I just bought a CircuPool SmartFlo VS 1.5. How long should it take to prime? I have filled basket up and turned pump on and opened pressure valve on filter. In videos it seems like it only takes a few seconds for water to start coming out of pressure valve on filter. I have left my pump on for 3-4 min and never get water. Shut off pump cause afraid of hurting something. Should I leave on longer? View answer

Asked 3 ´years ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 45

Will this replace my Pentair WF-24 without plumbing problems? View answer

Asked 3 ´years ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 46

My question is are both edge 25 & 40 compatible with each other so when the cell goes, I can replace the cell with the edge 25 or do I have to stay with the edge 40 View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool EDGE-25 Salt Chlorine Generator

Question 47

Currently there is a check valve on the return from my heater back into pool. I know the chlorine generator needs to be the last thing on the return before going back to pool. My question is does the check valve need to stay on between the heater and pool or can it be eliminated from the equation? If needs to stay there should check valve be before or after the chlorine generator? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 48

will it work with the easy touch system View answer

Asked 3 ´years ago | APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 49

can this replace my intellichior 20 the after market 40 View answer

Asked 3 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 50

Will this fit in place of a pentair super flow 1.5 hp single speed pump View answer

Asked 3 ´years ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Browse by Topic

Tools