Question 1

I currently have an RJ 20 plus that has performed well in my 16,000 gallon pool. The cell has now gone bad and needs replacing. Is there a benefit to upgrading to the RJ 30 plus cell and is it compatible with my old control unit? View answer

Asked 3 ´years ago | CircuPool RJ-20 PLUS Salt Chlorine Generator

Question 2

How can I register my Hayward salt system . My pool company has never given me the Manuel and my pool is paid in full . View answer

Asked 3 ´years ago | Salt Chlorinators > Hayward Aqua Rite W3 AQR9 (W3 T-Cell-9) Salt Chlorine Generator

Question 3

Are the cells dimensions compatible with replacement of a Autopilot Dig-220's without replumbing? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 4

I just bought a CircuPool SmartFlo VS 1.5. How long should it take to prime? I have filled basket up and turned pump on and opened pressure valve on filter. In videos it seems like it only takes a few seconds for water to start coming out of pressure valve on filter. I have left my pump on for 3-4 min and never get water. Shut off pump cause afraid of hurting something. Should I leave on longer? View answer

Asked 3 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 5

Will this replace my Pentair WF-24 without plumbing problems? View answer

Asked 3 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 6

My question is are both edge 25 & 40 compatible with each other so when the cell goes, I can replace the cell with the edge 25 or do I have to stay with the edge 40 View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool EDGE-25 Salt Chlorine Generator

Question 7

Currently there is a check valve on the return from my heater back into pool. I know the chlorine generator needs to be the last thing on the return before going back to pool. My question is does the check valve need to stay on between the heater and pool or can it be eliminated from the equation? If needs to stay there should check valve be before or after the chlorine generator? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 8

will it work with the easy touch system View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 9

can this replace my intellichior 20 the after market 40 View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 10

Just installed this, replacing my Intellichlor40, and the Salt Level light is blinking red. I check the salinity level and its at 4790, which is just over the 4500 for the ideal range. Will this unit still produce chlorine with this level of salt and the Salt High light blinking? Thank you. View answer

Asked 3 ´years ago | Salt Chlorinators > APX PERFORMANCE P40 Complete Salt Chlorine Generator

Question 11

Will this fit in place of a pentair super flow 1.5 hp single speed pump View answer

Asked 3 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 12

What is the minimum water temperature at which the RJ30+ will operate? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 13

What are the dimensions, primarily length of the salt generator cell/container and the flow sensor conduit? I have limited space between my heater and the returns to the pool and spa and need to make sure this will fit with the additions 12” from the heater to the flow sensor. Thanks Sean View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 14

Is this package compatible with the Pentair Easytouch automation system at our new home. The existing Easytouch system seems to still be in great shape, but the pump, filter canister and chlorinator are on their last leg. View answer

Asked 3 ´years ago | Packages > Ultimate Combo (Medium Pools) - (RJ-30 PLUS Salt System, SmartFlo® 1.7 THP VS Pump, and CJ-150 Cartridge Filter)

Question 15

Have Breeze 540 w/ only 1 maybe 2 cells generating chlorine. Is cell assembly gone bad or is a computer chip failed again? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE S5 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 540 (now CMP® PowerClean Salt® or Jacuzzi® JSCS40)

Question 16

Are the Electrolytic cells replaceable ? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 17

I have a Pentair IC40 today. I like this option. Will it plug directly into the old 4 pin outlet on the Intellitouch that was previously used by the IC40? I understand that it will not transmit data, but what exactly will not work on the Intellitouch? I'm guessing I won't be able to program it from the Intellitouch display, but that isn't a big deal. What about flow signals? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 18

Want is the difference between a RJ and anRJ + system ? Thanks View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 19

I have a Jandy AquaLink RS system but dont know how loosing the "RS-485 or data connection" will affect me? The AquaLink RS has an indoor control panel program timer to automatically start/stop the equipment - will this salt cell still start/stop on that timer? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 20

Is the physical size of the RJ series compatible with an IntelliChlor IC40? or will I have to do plumbing work? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 21

I have a Jandy AquaLink RS system but dont know how loosing the ""RS-485 or data connection"" will affect me? The AquaLink RS has an indoor control panel program timer to automatically start/stop the equipment - will this salt cell still start/stop on that timer? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 22

Does the switch unthread from the T View answer

Asked 3 ´years ago | Generic Flow Switch (with Temperature Sensor) - PVC Tee Fitting Not Included

Question 23

Has anyone had a problem with their control panel not getting power? My pump will run but no display or power on the control panel. wired it according to instructions, checked the internal fuse and try the reset button. Nothing View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 24

my return plumbing is 11/2 " can I reduce my core 35 to match View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 25

my return plumbing is 11/2 "" can I reduce my core 35 to match View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 26

I just installed the Core 35, my biggest concern is rain, i assume its water proof and it does have a lot of sun hitting it, can i cover it? or does it need airflow for cooling. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 27

Is this compatible with intellipH? View answer

Asked 3 ´years ago | Salt Chlorinators > APX PERFORMANCE P40 Complete Salt Chlorine Generator

Question 28

Is it compatible with the pentair power supply, and is the cell sold separately? View answer

Asked 3 ´years ago | Salt Chlorinators > APX PERFORMANCE P40 Complete Salt Chlorine Generator

Question 29

I have a Pentair IC40. Will this replace it without plumbing? Are the treads the same? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 30

I have a Hayward Turbocell TCELL925 25,000 gal. Software is Gold line Aqualogics Display R4.0. Is this replacement unit compatible? What is your return policy if I have compatibility issues? View answer

Asked 3 ´years ago | Salt Cells > Replacement W3 T-CELL-15 Turbo Cell for Hayward® AquaRite® (AQR15)

Question 31

Do I need to get a separate timer for my plug that I will plug my generator. My pump and heater are hardwired . On a timer. My salt generator will not bel wired into pool timer. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 32

I recently purchased ppc3 salt cell and installed it and working great. I had it on 24 boost and the display was showing cleaning cell for short period of time. Does it clean it self ? View answer

Asked 3 ´years ago | Salt Cells > Autopilot PPC3 Replacement Salt Cell (for RC-42, SC-48 cells)

Question 33

Is your top of the line system self cleaning? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 34

Will this work with RJ 30+ and how is it connected? I use a mechanical timer to turn on pump and salt system. View answer

Asked 3 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 35

I bought an rj60 in 2018 and isn’t working, my pool guy wants me to replace it, what should I do View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 36

will a RJ+ work with variable speed pumps? what is minimum speed for chlorine generator to work. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 37

What is the maximum gpm for this SWG? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal55 Salt Chlorine Generator

Question 38

Good morning my autopilot light is blinking and read low amp -cell? What can b the problem thank you View answer

Asked 3 ´years ago | Salt Cells > Autopilot PPC3 Replacement Salt Cell (for RC-42, SC-48 cells)

Question 39

how is tthe warrany done as far as replacement or repair View answer

Asked 3 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 40

Can you use a SJ-20 on a pool that holds 4500 gal water by using on lowest setting? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 41

How many operational hours can I expect this to last? I understand the Pentair has a 10,000 hour life. View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 42

When purchased what's included? Also what payment options do you provide? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 43

I have a CircuPool Universal 25. How do I verify cell version in system status menu. My cell model:Si 25. On the status menu I have the following options: F-9, C-9, F-15, C-15, l=-15Which one represents cell si25? View answer

Asked 3 ´years ago | CircuPool UL25 Replacement Cell

Question 44

I use this unit on the lowest setting for my salt water(NaCL)hot tub and it works great! I’m considering switching to bromine due to my wife’s skin sensitivity. Will it generate bromine if I flush the system and add the sodium bromide? If so, where would I buy It(NaBr)? Thanks View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 45

I have a circupool Si series with a Si30 cell. System keeps saying salt is low, reading 2400, but test at pool store says in range. I have cleaned cell, and no change in reading. Setting is set at cell type F-15. Is this the correct setting? Any ideas on what I need to do? Thank you. View answer

Asked 3 ´years ago | CircuPool® Si-15 Replacement Cell

Question 46

SJ series had a considerable leak, purchased a new ORing and it's still leaking... Suggestions ?? I also checked to make sure the plastic hadn't cracked,, all is good other than a continuous drip View answer

Asked 3 ´years ago | Parts > CircuPool SJ / SJA Large O-Ring for Electrolytic Cell Connection

Question 47

Will this bypass pipe fit a Hayward AQR100? View answer

Asked 3 ´years ago | Parts > Bypass Cell (fits Hayward® Aquarite®, Swimpure Plus®, CircuPool RJ, CircuPool Si)

Question 48

I have a ppc 1 salt cell now can I up grade to a ppc 3 salt clell View answer

Asked 3 ´years ago | Salt Cells > Autopilot PPC3 Replacement Salt Cell (for RC-42, SC-48 cells)

Question 49

I have an IChlor 30 and would like to replace it with this unit.Will it be a direct fit replacement? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 50

what the voltage for the control ? is there a 220v supply? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Browse by Topic

Tools