APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons Q&A

Question 1

Are the 10,000 hours the running time hours or the chlorine making hours because it does not make chlorine in the cold weather. Is there paperwork explaining error codes?What Is limited in the warranty? View answer

Asked 3 ´years ago

Question 2

We have a large pool and use ic 60 salt cell so can we get by with the I C 40? View answer

Asked 3 ´years ago

Question 3

how many hours for the cell expected life ? View answer

Asked 11 ´months ago

Question 4

Are the fittings the same size as the Pentair 521105? View answer

Asked 5 ´years ago

Question 5

I am considering going salt. I have a pentair system. My pool is just under 20k gals. Would the salt generator for a 60k gal pool be overkill? As my pool seems to grow algae easier and often. I get my pool water checked 2-3 times a week. Almost always I’m low on chlorine. I typically go through 6 bags of shock per week and 5 gals of liquid shock along with chlorine tablets. And my water is very seldom clear. ALL my numbers/levels are within range.. I havnt seen the bottom of my pool in a couple months. My hope is that a salt generator would get things better. View answer

Asked 1 ´year ago

Question 6

I have a Jandy AquaLink RS system but dont know how loosing the "RS-485 or data connection" will affect me? The AquaLink RS has an indoor control panel program timer to automatically start/stop the equipment - will this salt cell still start/stop on that timer? View answer

Asked 3 ´years ago

Question 7

i am replacing a ic30 pentair with ic60 i want to make the purchase very soon but i will not install it till summer time when does the warranty start also i realize i have to cut the pipes to install it because it is larger does the unit come with the other half of the unions and o rings to do the install thank you View answer

Asked 1 ´year ago

Question 8

I have a pentair IC40. Will this fit since its a larger size 60? View answer

Asked 1 ´year ago

Question 9

Is this just the salt cell by itself? Or is this a salt cell, flow switch and controller (just no power supply?)? View answer

Asked 1 ´year ago

Question 10

I have an intellichlor ic 30 . Will a ic 20 fit as a replacement? View answer

Asked 1 ´year ago

Question 11

I have an IC 60. Will the Apex P15 replacement cell plug directly into and use the existing Pentair power center for control? View answer

Asked 1 ´year ago

Question 12

What is the recommended method of cleaning this aftermarket cell. With acid, like the Intellichlor? View answer

Asked 1 ´year ago

Question 13

Who gives the tech support for this unit ? You or manufacturer ? Same question but in reference to warranty ? View answer

Asked 2 ´years ago

Question 14

I have a Pentair IC40 today. I like this option. Will it plug directly into the old 4 pin outlet on the Intellitouch that was previously used by the IC40? I understand that it will not transmit data, but what exactly will not work on the Intellitouch? I'm guessing I won't be able to program it from the Intellitouch display, but that isn't a big deal. What about flow signals? View answer

Asked 3 ´years ago

Question 15

Will this generator still work with the pentair screen logic app? View answer

Asked 4 ´years ago

Question 16

what about warranty who warranty this Pentair or ? View answer

Asked 5 ´years ago

Question 17

Can you replace the ichlor 30 with Aftermarket IC60? View answer

Asked 2 ´years ago

Question 18

I have a Pentair sys with IC 40 and have read that Pentair says I can replace it with a IC 60 and set it at a lower setting and it will last longer. Can I use the CFICGEN60 to replace the IC 40 that is going bad the same way View answer

Asked 5 ´years ago

Question 19

I have a pentair ichlor 30 salt chlorine generator I'd like to replace with EC-521105 is that compabitable? View answer

Asked 2 ´years ago

Question 20

My current Pentaire I 40TH (I think) allows me to view, change percentage output and read salt level thru my phone app....will this allow me to do the same via the app? if not, are there any? View answer

Asked 1 ´year ago

Question 21

are you expecting more Replacement Cell for Pentair IntelliChlor IC60 (521105) - Generic Salt Cell Upgrade soon? View answer

Asked 5 ´years ago

Question 22

I'm replacing a Pentair IC40 does your P60 fit in the same space threads etc. Or do I need the P40 to get the same fit. View answer

Asked 1 ´year ago

Question 23

Just opened pool and installed CFICGEN60. Is there any reason for concern that the generator light is flashing green? All other lights are green. View answer

Asked 5 ´years ago

Question 24

do I need power supply w this? View answer

Asked 5 ´years ago

Question 25

I have a Pentair IC20, does the Aftermarket IC60 plug directly and replace my IC20? View answer

Asked 4 ´years ago

Question 26

Just installed, P60, at 40% or even at 100% “generate” light is always solid green.Is that normal? View answer

Asked 1 ´year ago

Question 27

My pipe configuration requires that I read the control panel upside down. Can it be reversed? View answer

Asked 5 ´months ago

Question 28

Do they make one with an app for remote connectivity? View answer

Asked 6 ´months ago

Question 29

I have a Jandy AquaLink RS system but dont know how loosing the ""RS-485 or data connection"" will affect me? The AquaLink RS has an indoor control panel program timer to automatically start/stop the equipment - will this salt cell still start/stop on that timer? View answer

Asked 3 ´years ago

APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic

Tools