Question 1

I currently have a Resiliance E-Series system installed that is not operating. Can the RJ system connect directly and in place of the E-Series cell? It is very similar to your Core-35/55 system. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 2

What is the difference between the RJ line and the Core line? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 3

how much is shipping to the ukthanks View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE C4 Aftermarket Replacement Cell fits CompuPool CPSC-16 | up to 16,000 gallons

Question 4

can you control the system via wifi and an app? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-45 Salt Chlorine Generator

Question 5

can you purchase a replacement anode ? it looks like the unit anode can be replaced. But want to confirm? if yes what is the part number and cost? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-45 Salt Chlorine Generator

Question 6

I have had this unit for just over 4 months. The percent generating is no longer working. For the last week the chlorine level in the pool has been very high. I have been bringing the generation down from the normal 40% to 30%, 20% and finaly 10%. The cell generate light never turns off, no matter when I look at it, it is on, unless I go to 0%. How do I get warranty help with this? View answer

Asked 2 ´years ago | Salt Chlorinators > APX PERFORMANCE P40 Complete Salt Chlorine Generator

Question 7

Will this fit a RJ60+? View answer

Asked 2 ´years ago | Parts > Cleaning Stand (fits CircuPool RJ, Universal, and Hayward® Aquarite® Salt Systems)

Question 8

How do I replace end cap without paying for a complete system? View answer

Asked 2 ´years ago | Parts > Saline Generating Systems Clear Housing for SGS Breeze, Wave, and CMP PowerClean

Question 9

BY INSTALLING THE CORE15 CAN I CHANGE MY POOL FROM A CHLORENE TO A SALT ONE? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 10

I just installed the INDIGO3-XL Ozone Generator for Swimming Pools that I ordered from you How can I see if it working and producing Ozone ?The Operation Guide shows :Section 4 ice Visual Inspection Periodically inspect the unit to ensure it is functioning correctly by simply observing the end plate gaskets for a light blue glow while the system is in operation.I do not have any light blue glow. The Unit is totally sealed, and I have no idea where a light blue glow may come. Does that mean that the new unit is not working ?Can I unscrew the Top cap to see if the VUV is turning blue when on ? View answer

Asked 2 ´years ago | Ozone > CircuPool INDIGO3-XL Ozone Generator for Swimming Pools

Question 11

Hi all,can I change my RJ30+ cell into a RJ60+?How much is the price for this? My old system model RJ30+ has the serial #: 05AB0DA4D2020066.ThanksJens View answer

Asked 2 ´years ago | Salt Cells > CircuPool RJ60 Classic Replacement Cell (Electrode Only)

Question 12

At what flow rate will the flow switch activate the unit. I have a variable speed that runs a different speeds throughout the day and trying to determine if I will need to add a timer. Thanks. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-25 Salt Chlorine Generator

Question 13

Does anyone own this? Is this worth it? Does it do a good job? View answer

Asked 2 ´years ago | Robotic Cleaners > Pool Blaster CX-1 Cordless Robotic Pool Cleaner | Lithium-Powered | Water Tech 77000RR

Question 14

I currently have a 20000 gallon sand filter do I need to change the media for the conversion View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 15

So I just got done cleaning my filter, remove the cell and cleaned it as well and added salt to the pool. I feel I put too much in because I’m getting a high salinity alarm. Do I need to drain water out of the pool and put untreated, water back into lower the salinity or will it still chlorinate and just have a high salt contact. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 16

I have a 16,000 gallon inground gunite pool, with heater, Ultra UV2 light, inline tablet chlorinator and want to switch to a SWG. Can I install a RJ-60+ or is that too big? Do I need to remove the Ultra UV2 light and inline tablet chlorinator? Also, my CYA level are extremely high, do I need to get those down before converting? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 17

I currently use the PPC2 for my 30,000 gallon pool and it struggles all year to keep chlorine even when perfectly balanced. Can I replace the cell only with a PPC3 or is that not allowed? View answer

Asked 2 ´years ago | Salt Cells > Autopilot PPC3 Replacement Salt Cell (for RC-42, SC-48 cells)

Question 18

My ask Jay 55 circuit pole is leaking. The blue and where the power cord attaches is cracked. The cell works fine but loosing water. This is the second time I have an issue. Before it leaked at the opening where the cord came out. How do I replace the blue end without buying a new cell. Mine is not old and works. View answer

Asked 2 ´years ago | Salt Cells > CircuPool® SJ-55 Classic Replacement Salt Cell

Question 19

I currently have a Hayward Agua Logic system that controls the chlorinated as well as the pool lights, a Polaris cleaner, and a heater….will the RJ+ control all of these systems? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 20

I'm looking for a replacement for ECOmatic ESC 16, 240V up to 15,000 gal. I note it is out of stock. Will you be getting more replacement items for this system, or is there something else that will work? I was told I have an issue with the control box as well although it is currently still working. What is recommended? If I haven't given you adequate info please tell me what you need? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE E13 Aftermarket Replacement Cell fits Ecomatic® ESC24 / ESC36 / ESC48 Salt Cell

Question 21

Where does metal coil get connected to? View answer

Asked 2 ´years ago | Parts > Custom Molded Plastics Inline 2" Zinc Anode & Water Bond with Copper Wire

Question 22

I bought a circu gen t-15 from you guys last November it has quit working what do I do next to get it replaced View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 23

I have a SJ-30, I need to reduce it down to 1 1/2". What to I need to buy from you to do that View answer

Asked 2 ´years ago | Parts > CircuPool SJ Adapter Kit (from existing RJ-Classic Models)

Question 24

I have a SJ-30, I need to reduce it down to 1 1/2"". What to I need to buy from you to do that View answer

Asked 2 ´years ago | Parts > CircuPool SJ Adapter Kit (from existing RJ-Classic Models)

Question 25

How do you clean a salt cell View answer

Asked 2 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 26

I have a Circupool Universal 40 and the cell is looking to be about used up. Wondering if I can buy this as a replacement and in so doing upgrade? Will it work with my current unions? Control panel? View answer

Asked 2 ´years ago | Salt Cells > CircuPool® Si-60 Replacement Cell

Question 27

I have an inline chlorinator. Does it have to be eliminated when the conversion is made? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 28

My question is regarding below note. I’ve Intellitouch system, does it mean this Salt cell will not work with it? I’d like the cell to turn on automatically per the set schedules in Intellitouch system.Note: The generic IntelliChlor cell does not utilize a RS-485 or data connection for integration with automation systems like Pentair Intellitouch, Pentair Easy Touch®, Jandy® AquaLink®, Hayward® AquaLogic® and Hayward ProLogic® View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 29

I have a Monarch pool systems ESC36 min salt level 3000 ppm (eco matic). Pool guy says salt cell not working. What is the exact replacement you recommend and how long does it last. Thank you View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE E13 Aftermarket Replacement Cell fits Ecomatic® ESC24 / ESC36 / ESC48 Salt Cell

Question 30

Can this be started with a pool already chlorinate with chemicals. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 31

How often do i have replace salt. What type of salt is used. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 32

why is my cell voltage for model ul40 0.0V View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 33

Will it stink eyes that are open under water? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 34

My pool was completed in 2006 and uses the Aqua Logic system, I have had 4 Turbo T-cell 15 during that time. Is the unit compatible with my system? View answer

Asked 2 ´years ago | Salt Cells > Optimum® Simple Cell for T15 Replacement cell fits Hayward® Aqua Rite® T-CELL-15® | up to 40,000 gallons

Question 35

Can this unit be plugged in to an existing Hayward Power Center for the T-15 Cell? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal55 Salt Chlorine Generator

Question 36

Do I have to use the flow sensors. I have an above ground pool, 12,000 gal. Using a 2 ph pump non verifiable flow. My lines are flexible and not sure I could rig up an adapter for the flow sensor. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-15 Salt Chlorine Generator

Question 37

My RJ-45 is showing High Temp for water temperature 160 deg, pool is at 82 deg. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 38

My in-ground pool is 5.5 ft at the deepest and3.5 in the shallow end and is approximately 16,000 gallons which Circupool Edge should I buy: Edge 25 or Edge 40? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 39

How do you know how much free chlorine is in the water if the display only shows good bad etc View answer

Asked 2 ´years ago | Digital Pool Testers > SafeDip 6 in 1 Electronic Water Tester

Question 40

I know the electrode for the ionizer only lasts 1 year, but how long does the whole system last? View answer

Asked 2 ´years ago | Ion Generators > Clearwater R-40, Pool Ionization System

Question 41

CIRCUPOOL RJ30+IS MODEL NUMBER,WHAT REPLACEMENT CELL DO I NEED View answer

Asked 2 ´years ago | Salt Cells > CircuPool RJ30 Classic Replacement Cell (Electrode Only)

Question 42

Can I use this cell for a 10,000 gallon pool? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 43

Where can I order a replacement battery for the CX1? View answer

Asked 2 ´years ago | Robotic Cleaners > Pool Blaster CX-1 Cordless Robotic Pool Cleaner | Lithium-Powered | Water Tech 77000RR

Question 44

What is the best salt level for the sj20 View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 45

Need my cell replaced it is under warranty View answer

Asked 2 ´years ago | Salt Cells > AutoPilot ChlorSync CS30 Replacement Salt Cell

Question 46

Is this compatible with my 17 year old Aquarite/ Goldline system and if so do I also need the new O rings? Thank you. View answer

Asked 2 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 47

For the pump CircuPool SmartFlo® Variable Speed Pool Pump 1.5, if it does not use the old mechanical timer, how do you control the attached cleaner booster pump. It is currently wired where the pump must be on for it to be on. View answer

Asked 2 ´years ago | Manufacturers > CircuPool > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 48

My wall Unit is Showing Cell Not Match. What does that mean? Thank You View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 49

My rj45 controller touch pad is not working other than the power and super clor buttons. Will this correct the issue the system is 5 years old. View answer

Asked 2 ´years ago | RJ Keypad (3rd Gen, RJNK, 11-11 Pin)

Question 50

I have a pentair ichlor 30 salt chlorine generator I'd like to replace with EC-521105 is that compabitable? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Browse by Topic

Tools