Question 1

Can it be mounted ( Plumbed) vertically? View answer

Asked 2 ´years ago | CircuPool CORE-15 Salt Chlorine Generator

Question 2

Does the dummy cell come with gaskets? Mine are worn out and the gaskets used for the acid cleaning kit are too big. View answer

Asked 2 ´years ago | Parts > Bypass Cell (fits Pentair® IntelliChlor® Salt Systems)

Question 3

Can I put a 540 replacement cell in a 320 system? I know it will fit, but will the system function properly. View answer

Asked 2 ´years ago | APX PERFORMANCE S3 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 320 (now CMP® PowerClean Salt®)

Question 4

Is this compatible with the IC-30? View answer

Asked 2 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 5

My pump room is 120 volts. Do these pumps all require 220? View answer

Asked 2 ´years ago | CircuPool SmartFlo® Variable Speed Pool Pump - 3.0 THP

Question 6

What saltwater chlorination system/model do you recommend for a new in ground 3,000 gal cement plunge pool? Also, Is it best to have the clear pipe to see the titanium plates in the converter for ease of monitoring condition? Installed with 1.5 hp variable speed pump 230V with 2 inch pipe inlet/outlet. View answer

Asked 2 ´years ago | CircuPool Universal25 Salt Chlorine Generator

Question 7

The inner plastic ring on my CMP 540 has several cracks around the perimeter causing water to leak out of the housing. The salt generator is working fine. Is there a way to replace the plastic "cap" without replacing the entire cell? View answer

Asked 2 ´years ago | APX PERFORMANCE S5 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 540 (now CMP® PowerClean Salt® or Jacuzzi® JSCS40)

Question 8

The inner plastic ring on my CMP 540 has several cracks around the perimeter causing water to leak out of the housing. The salt generator is working fine. Is there a way to replace the plastic ""cap"" without replacing the entire cell? View answer

Asked 2 ´years ago | APX PERFORMANCE S5 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 540 (now CMP® PowerClean Salt® or Jacuzzi® JSCS40)

Question 9

Can i use this with a chlorine pool? View answer

Asked 2 ´years ago | UV Sanitizers > CMP Wave UV-C 50 Ultraviolet Sanitizer System for Residential Pools

Question 10

I have the breeze 320 and the chlorinator will not shut off after the pump shuts off. I read that it has an internal flow sensor but it has no part number for this problem. View answer

Asked 2 ´years ago | Salt Chlorinators > CMP Powerclean Salt Ultra 320 Salt Chlorinator (SGS Saline Generating Systems Breeze 320) | 52000-220-000

Question 11

What is the difference between the RJ line and the Core line? View answer

Asked 2 ´years ago | CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 12

I currently have a Resiliance E-Series system installed that is not operating. Can the RJ system connect directly and in place of the E-Series cell? It is very similar to your Core-35/55 system. View answer

Asked 2 ´years ago | CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 13

how much is shipping to the ukthanks View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE C4 Aftermarket Replacement Cell fits CompuPool CPSC-16 | up to 16,000 gallons

Question 14

can you purchase a replacement anode ? it looks like the unit anode can be replaced. But want to confirm? if yes what is the part number and cost? View answer

Asked 2 ´years ago | CircuPool SJ-45 Salt Chlorine Generator

Question 15

can you control the system via wifi and an app? View answer

Asked 2 ´years ago | CircuPool SJ-45 Salt Chlorine Generator

Question 16

I have had this unit for just over 4 months. The percent generating is no longer working. For the last week the chlorine level in the pool has been very high. I have been bringing the generation down from the normal 40% to 30%, 20% and finaly 10%. The cell generate light never turns off, no matter when I look at it, it is on, unless I go to 0%. How do I get warranty help with this? View answer

Asked 2 ´years ago | Salt Chlorinators > APX PERFORMANCE P40 Complete Salt Chlorine Generator

Question 17

Will this fit a RJ60+? View answer

Asked 2 ´years ago | Parts > Cleaning Stand (fits CircuPool RJ, Universal, and Hayward® Aquarite® Salt Systems)

Question 18

How do I replace end cap without paying for a complete system? View answer

Asked 2 ´years ago | Parts > Saline Generating Systems Clear Housing for SGS Breeze, Wave, and CMP PowerClean

Question 19

BY INSTALLING THE CORE15 CAN I CHANGE MY POOL FROM A CHLORENE TO A SALT ONE? View answer

Asked 2 ´years ago | CircuPool CORE-15 Salt Chlorine Generator

Question 20

I just installed the INDIGO3-XL Ozone Generator for Swimming Pools that I ordered from you How can I see if it working and producing Ozone ?The Operation Guide shows :Section 4 ice Visual Inspection Periodically inspect the unit to ensure it is functioning correctly by simply observing the end plate gaskets for a light blue glow while the system is in operation.I do not have any light blue glow. The Unit is totally sealed, and I have no idea where a light blue glow may come. Does that mean that the new unit is not working ?Can I unscrew the Top cap to see if the VUV is turning blue when on ? View answer

Asked 2 ´years ago | CircuPool INDIGO3-XL Ozone Generator for Swimming Pools

Question 21

Hi all,can I change my RJ30+ cell into a RJ60+?How much is the price for this? My old system model RJ30+ has the serial #: 05AB0DA4D2020066.ThanksJens View answer

Asked 2 ´years ago | CircuPool RJ60 Classic Replacement Cell (Electrode Only)

Question 22

I currently have a 20000 gallon sand filter do I need to change the media for the conversion View answer

Asked 2 ´years ago | CircuPool SJ-35 Salt Chlorine Generator

Question 23

At what flow rate will the flow switch activate the unit. I have a variable speed that runs a different speeds throughout the day and trying to determine if I will need to add a timer. Thanks. View answer

Asked 2 ´years ago | CircuPool EDGE-25 Salt Chlorine Generator

Question 24

Does anyone own this? Is this worth it? Does it do a good job? View answer

Asked 2 ´years ago | Robotic Cleaners > Pool Blaster CX-1 Cordless Robotic Pool Cleaner | Lithium-Powered | Water Tech 77000RR

Question 25

So I just got done cleaning my filter, remove the cell and cleaned it as well and added salt to the pool. I feel I put too much in because I’m getting a high salinity alarm. Do I need to drain water out of the pool and put untreated, water back into lower the salinity or will it still chlorinate and just have a high salt contact. View answer

Asked 2 ´years ago | CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 26

I have a 16,000 gallon inground gunite pool, with heater, Ultra UV2 light, inline tablet chlorinator and want to switch to a SWG. Can I install a RJ-60+ or is that too big? Do I need to remove the Ultra UV2 light and inline tablet chlorinator? Also, my CYA level are extremely high, do I need to get those down before converting? View answer

Asked 2 ´years ago | CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 27

I currently use the PPC2 for my 30,000 gallon pool and it struggles all year to keep chlorine even when perfectly balanced. Can I replace the cell only with a PPC3 or is that not allowed? View answer

Asked 2 ´years ago | Salt Cells > Autopilot PPC3 Replacement Salt Cell (for RC-42, SC-48 cells)

Question 28

My ask Jay 55 circuit pole is leaking. The blue and where the power cord attaches is cracked. The cell works fine but loosing water. This is the second time I have an issue. Before it leaked at the opening where the cord came out. How do I replace the blue end without buying a new cell. Mine is not old and works. View answer

Asked 2 ´years ago | Salt Cells > CircuPool® SJ-55 Classic Replacement Salt Cell

Question 29

I currently have a Hayward Agua Logic system that controls the chlorinated as well as the pool lights, a Polaris cleaner, and a heater….will the RJ+ control all of these systems? View answer

Asked 2 ´years ago | CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 30

I'm looking for a replacement for ECOmatic ESC 16, 240V up to 15,000 gal. I note it is out of stock. Will you be getting more replacement items for this system, or is there something else that will work? I was told I have an issue with the control box as well although it is currently still working. What is recommended? If I haven't given you adequate info please tell me what you need? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE E13 Aftermarket Replacement Cell fits Ecomatic® ESC24 / ESC36 / ESC48 Salt Cell

Question 31

I have a SJ-30, I need to reduce it down to 1 1/2". What to I need to buy from you to do that View answer

Asked 2 ´years ago | Parts > CircuPool SJ Adapter Kit (from existing RJ-Classic Models)

Question 32

Where does metal coil get connected to? View answer

Asked 2 ´years ago | Parts > Custom Molded Plastics Inline 2" Zinc Anode & Water Bond with Copper Wire

Question 33

I have a SJ-30, I need to reduce it down to 1 1/2"". What to I need to buy from you to do that View answer

Asked 2 ´years ago | Parts > CircuPool SJ Adapter Kit (from existing RJ-Classic Models)

Question 34

I bought a circu gen t-15 from you guys last November it has quit working what do I do next to get it replaced View answer

Asked 2 ´years ago | CircuPool Universal25 Salt Chlorine Generator

Question 35

How do you clean a salt cell View answer

Asked 2 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 36

I have a Circupool Universal 40 and the cell is looking to be about used up. Wondering if I can buy this as a replacement and in so doing upgrade? Will it work with my current unions? Control panel? View answer

Asked 2 ´years ago | CircuPool® Si-60 Replacement Cell

Question 37

I have an inline chlorinator. Does it have to be eliminated when the conversion is made? View answer

Asked 2 ´years ago | CircuPool EDGE-40 Salt Chlorine Generator

Question 38

My question is regarding below note. I’ve Intellitouch system, does it mean this Salt cell will not work with it? I’d like the cell to turn on automatically per the set schedules in Intellitouch system.Note: The generic IntelliChlor cell does not utilize a RS-485 or data connection for integration with automation systems like Pentair Intellitouch, Pentair Easy Touch®, Jandy® AquaLink®, Hayward® AquaLogic® and Hayward ProLogic® View answer

Asked 2 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 39

I have a Monarch pool systems ESC36 min salt level 3000 ppm (eco matic). Pool guy says salt cell not working. What is the exact replacement you recommend and how long does it last. Thank you View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE E13 Aftermarket Replacement Cell fits Ecomatic® ESC24 / ESC36 / ESC48 Salt Cell

Question 40

why is my cell voltage for model ul40 0.0V View answer

Asked 2 ´years ago | CircuPool Universal40 Salt Chlorine Generator

Question 41

How often do i have replace salt. What type of salt is used. View answer

Asked 2 ´years ago | CircuPool CORE-35 Salt Chlorine Generator

Question 42

Will it stink eyes that are open under water? View answer

Asked 2 ´years ago | CircuPool CORE-35 Salt Chlorine Generator

Question 43

Can this be started with a pool already chlorinate with chemicals. View answer

Asked 2 ´years ago | CircuPool CORE-35 Salt Chlorine Generator

Question 44

My pool was completed in 2006 and uses the Aqua Logic system, I have had 4 Turbo T-cell 15 during that time. Is the unit compatible with my system? View answer

Asked 2 ´years ago | Salt Cells > Optimum® Simple Cell for T15 Replacement cell fits Hayward® Aqua Rite® T-CELL-15® | up to 40,000 gallons

Question 45

Can this unit be plugged in to an existing Hayward Power Center for the T-15 Cell? View answer

Asked 2 ´years ago | CircuPool Universal55 Salt Chlorine Generator

Question 46

Do I have to use the flow sensors. I have an above ground pool, 12,000 gal. Using a 2 ph pump non verifiable flow. My lines are flexible and not sure I could rig up an adapter for the flow sensor. View answer

Asked 2 ´years ago | CircuPool EDGE-15 Salt Chlorine Generator

Question 47

My in-ground pool is 5.5 ft at the deepest and3.5 in the shallow end and is approximately 16,000 gallons which Circupool Edge should I buy: Edge 25 or Edge 40? View answer

Asked 2 ´years ago | CircuPool EDGE-40 Salt Chlorine Generator

Question 48

My RJ-45 is showing High Temp for water temperature 160 deg, pool is at 82 deg. View answer

Asked 2 ´years ago | CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 49

How do you know how much free chlorine is in the water if the display only shows good bad etc View answer

Asked 2 ´years ago | Digital Pool Testers > SafeDip 6 in 1 Electronic Water Tester

Question 50

I know the electrode for the ionizer only lasts 1 year, but how long does the whole system last? View answer

Asked 2 ´years ago | Ion Generators > Clearwater R-40, Pool Ionization System

Browse by Topic

Tools