Question 1

Can the CORE35 be installed vertically? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 2

Is the electric plug round View answer

Asked 2 ´years ago | CircuPool® RJ-30 Replacement Cell

Question 3

What does the plug look like View answer

Asked 2 ´years ago | CircuPool® RJ-30 Replacement Cell

Question 4

I have an above ground pool, my current pump has a regular plug but according to the SJ-35A system, they both have to be hard wired into a timer. Can I not purchase a plug for the SJ-35A to plug into a timer or do I have to have my pump cord changed? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 5

Will a reading of 468 phosphate cause generator not to work? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 6

Dose it work with heater View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 7

does RJ 45 need to be installed horizontally. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 8

What are the dimensions of the O-Ring? The xxxx on cover I have is 5" across and 4 5/8" just inside the lip of the cover. I do not see any groove in the clear housing for an O-Ring. I have the Breeze Salt Generating System Model 760 and we just replaced the housing. View answer

Asked 2 ´years ago | Parts > SGS Breeze O-Ring

Question 9

What are the dimensions of the O-Ring? The xxxx on cover I have is 5"" across and 4 5/8"" just inside the lip of the cover. I do not see any groove in the clear housing for an O-Ring. I have the Breeze Salt Generating System Model 760 and we just replaced the housing. View answer

Asked 2 ´years ago | Parts > SGS Breeze O-Ring

Question 10

What are the dimensions of the O-Ring? The xxxx on cover I have is 5"" across and 4 5/8"" just inside the lip of the cover. I do not see any groove in the clear housing for an O-Ring. I have the Breeze Salt Generating System Model 760 and we just replaced the housing. View answer

Asked 2 ´years ago | Parts > SGS Breeze O-Ring

Question 11

What are the dimensions of the O-Ring? The xxxx on cover I have is 5"" across and 4 5/8"" just inside the lip of the cover. I do not see any groove in the clear housing for an O-Ring. I have the Breeze Salt Generating System Model 760 and we just replaced the housing. View answer

Asked 2 ´years ago | Parts > SGS Breeze O-Ring

Question 12

What are the dimensions of the O-Ring? The xxxx on cover I have is 5"" across and 4 5/8"" just inside the lip of the cover. I do not see any groove in the clear housing for an O-Ring. I have the Breeze Salt Generating System Model 760 and we just replaced the housing. View answer

Asked 2 ´years ago | Parts > SGS Breeze O-Ring

Question 13

Hi, do you ship to Cyprus? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE C4 Aftermarket Replacement Cell fits CompuPool CPSC-16 | up to 16,000 gallons

Question 14

I have a small in-ground plunge pool (south Florida climate), around 1000 gals. I see the TruClear is rated to 35,000 gals. Will it work on a much smaller pool? TIA - View answer

Asked 2 ´years ago | Salt Chlorinators > Jandy® TruClear Salt Chlorine Generator "Trade Grade" - With Plumbing Unions

Question 15

I have a cold reading on my panel will the flow switch cause this reading View answer

Asked 2 ´years ago | Generic Flow Switch (with Temperature Sensor) - PVC Tee Fitting Not Included

Question 16

Will the cell ever need to be replace and if so how often? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 17

I have an intellichlor ic 30 . Will a ic 20 fit as a replacement? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 18

I have an ichlor 30 pentair system. Will an IC 40 apex replacement cell be compatible with my pentair power supply? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 19

Will this cleaning stand fit the Circupool Edge series? View answer

Asked 2 ´years ago | Parts > Convenience Kit - Value Pack

Question 20

I have a salt generator and it need repair and check up, where I can send it for repair.Thank you View answer

Asked 2 ´years ago | CircuPool RJ-20 PLUS Salt Chlorine Generator

Question 21

Do you have the installation instructions available? View answer

Asked 2 ´years ago | Filters > CircuPool TJ-16 "Typhoon" Centrifugal Pre-Filter

Question 22

Are there any compatibility problems replacing a Hayward Aquarite W3AQR3? View answer

Asked 2 ´years ago | CircuPool RJ-20 PLUS Salt Chlorine Generator

Question 23

I recently purchased the Waterco CC150 from you and installed it. From the very start, the pressure gauge reads zero. I removed the gauge to see if it had anything blocking it, reinstalled and it never reads anything but zero. I don't think this is normal. Shouldn't it have a reading while the pump is running? View answer

Asked 2 ´years ago | Filters > Waterco CC150 Trimline Slim Cartridge Filter - 150 Sq. Ft.

Question 24

Does this core fit the older design Core-35 generator with the white upper housing? View answer

Asked 2 ´years ago | CircuPool CORE35 Replacement Salt Cell

Question 25

Will this fit a goldline aqua plus system View answer

Asked 2 ´years ago | Salt Cells > CircuPool® CIR-GEN9 Aftermarket Replacement Cell fits Hayward® AquaRite® 25,000 Gal. Models

Question 26

I received an all 2"" black pipe tj16 bypass, what is that material abs or cpvc? So I know what glue will I use... View answer

Asked 2 ´years ago | Filters > Bypass Valve Assembly Kit for CircuPool® TJ16 Pre-Filter (For Use with DE Filters Only)

Question 27

Is it compatible with Hayward gold line temperature sensors, and what is the diameter of the pvc ends View answer

Asked 2 ´years ago | CircuPool EDGE Flow/Temperature Sensor PVC T-Fitting

Question 28

add says free shipping but checkout shows 22.00. which is it? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 29

I have an IC 60. Will the Apex P15 replacement cell plug directly into and use the existing Pentair power center for control? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 30

What size variable speed pump would I need for a 22,000 gal in ground pool View answer

Asked 2 ´years ago | Manufacturers > Hayward > Hayward® TriStar VS Pump

Question 31

Does the Circupool Edge bypass cell fit Circupool Universal 40? View answer

Asked 2 ´years ago | Parts / Accessories > CircuPool EDGE Bypass Cell

Question 32

Will this unit come with a warranty and if so for how long? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE V15 Aftermarket Replacement Cell fits Hayward® AquaRite® T-15 Cell for 40,000 Gallons Max

Question 33

If you don't use acid to clean the cell, how do you clean the cell? I need to replace my Pentair Intellichlor that never lasts more that 1-2 years with regular (every 6 weeks) cleaning with acid. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator

Question 34

What is the recommended method of cleaning this aftermarket cell. With acid, like the Intellichlor? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 35

Looking to buy a MegaChlor-CD for my 6,500 gal. above ground pool. What exactly is the CM-PS -HIDE. Is it a mounting box so the control unit is not exposed to the elements? View answer

Asked 2 ´years ago | Salt Chlorinators > ControlOMatic - MegaChlor Pool and Swim Spa Chlorine Generator

Question 36

I have a older 60k do you have a cell for it View answer

Asked 2 ´years ago | CircuPool® RJ-60 Replacement Cell

Question 37

My current Pentaire I 40TH (I think) allows me to view, change percentage output and read salt level thru my phone app....will this allow me to do the same via the app? if not, are there any? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 38

Does this replacement cell come with the new cord or is that sold separately? View answer

Asked 2 ´years ago | Salt Cells > Autopilot PPC1 Replacement Salt Cell (for RC-35/22, SC-36 cells)

Question 39

¿Pueden enviar una celda del modelo CPSC-16 de 4 placas a -Murcia- España? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE C4 Aftermarket Replacement Cell fits CompuPool CPSC-16 | up to 16,000 gallons

Question 40

Could I replace the CircuPool CORE 35 cell with a CORE 55 cell? View answer

Asked 2 ´years ago | CircuPool CORE35 Replacement Salt Cell

Question 41

I have the Clearwater MineralPURE RC-50 scaleblaster. I just had the pool redone and they have installed a clearblue Chlorinator. Is it good to use the chlorinator with the ionizer? View answer

Asked 2 ´years ago | Ion Generators > Clearwater RC-50, Pool Ionization System with ScaleBlaster

Question 42

Can the Typhoon Pre Filter be installed on it’s side or does it need to be upright? View answer

Asked 2 ´years ago | Filters > CircuPool TJ-16 "Typhoon" Centrifugal Pre-Filter

Question 43

I have a 40000 gallon pool with a hayward aquarite goldline plus system. My old cell kept giving a low salt reading so i put in more salt several times but it did not change. I ordered your replacement cell and the diagnostics said 6400 ppm salt level. I drained maybe 15,000 gallons and refilled it and the salt reading in diagnostics is still 6400 ppm. Any suggestions? View answer

Asked 2 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models

Question 44

Can the unit be installed vertically ? My plumbing would except this with little to no modifications if so. If not, not a big deal. I figured I'd ask. Thank you. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 45

Can I replace a Pentair IC40 with RJ 30+ ? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 46

Does this flow sensor include a temperature sensor? My chlorinator displays “hot water” and is not working. Troubleshooting states to change the temperature sensor, but I can’t locate one. View answer

Asked 2 ´years ago | [categoryname] > APX PERFORMANCE P-Series Flow Switch for P20, P40, P60

Question 47

What is the water temperature that the Edge 40 system uses to shut off the salt cell during cold weather? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 48

I just purchased the Edge 40 and will likely need to install it vertically. Will this kit work with the Edge 40? View answer

Asked 2 ´years ago | Parts > CircuPool Vertical Installation Kit

Question 49

Is the rated lifespan of the cell determined when running at 100%? So if the lifespan is 15k hours, is it safe to assume we could get closer to 30k hours running at 50%? Just trying to ballpark what to expect. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 50

The provided power cable will not be long enough to reach my timer box. How would you recommend extending it to be hard-wired to the timer box? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Browse by Topic

Tools