I have a 40000 gallon pool with a hayward aquarite goldline plus system. My old cell kept giving a low salt reading so i put in more salt several times but it did not change. I ordered your replacement cell and the diagnostics said 6400 ppm salt level. I drained maybe 15,000 gallons and refilled it and the salt reading in diagnostics is still 6400 ppm. Any suggestions? View answer
Asked 1 ´year ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models
Is the rated lifespan of the cell determined when running at 100%? So if the lifespan is 15k hours, is it safe to assume we could get closer to 30k hours running at 50%? Just trying to ballpark what to expect. View answer
Asked 1 ´year ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator
Will this house a RJ45plus cell ? View answer
Asked 1 ´year ago | Parts > CircuPool Clear Housing for RJ Classic
To whomever answered my question about the connection of the Dolphin to the app, thank-you so much for the information. I now have the confidence to purchase it again. I wish Maytronics customer service would have sent me that information instead of what they did, though I am convinced there was something wrong with the unit. Thank-you again. View answer
Asked 1 ´year ago | Robotic Cleaners > Dolphin Nautilus CC Plus Automatic Robotic Pool Cleaner with Wi-Fi | Maytronics 99996406-PCI
I had purchased this unit last fall and was never able to connect it to Wifi so returned it. I tried Maytronics Customer Service but they just kept saying to send in for service, since it was $60 to send for service I just returned the entire unit. I used it a couple of times and liked it overall. My question, I believe that bluetooth (from the phone app) is used for the initial connection and then it is set-up on wifi. Is this correct? The phone app could never find the unit. View answer
Asked 1 ´year ago | Robotic Cleaners > Dolphin Nautilus CC Plus Automatic Robotic Pool Cleaner with Wi-Fi | Maytronics 99996406-PCI
How many gallons is my pool? View answer
Asked 1 ´year ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator
how to estimate size of pool View answer
Asked 1 ´year ago | Salt Chlorinators > CircuPool SJ-55 Salt Chlorine Generator
I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says ""inspect cell"". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer
Asked 1 ´year ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says "inspect cell". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer
Asked 1 ´year ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
What saltwater chlorination system/model do you recommend for a new in ground 3,000 gal cement plunge pool? Also, Is it best to have the clear pipe to see the titanium plates in the converter for ease of monitoring condition? Installed with 1.5 hp variable speed pump 230V with 2 inch pipe inlet/outlet. View answer
Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator
The inner plastic ring on my CMP 540 has several cracks around the perimeter causing water to leak out of the housing. The salt generator is working fine. Is there a way to replace the plastic ""cap"" without replacing the entire cell? View answer
Asked 2 ´years ago | Salt Cells > APX PERFORMANCE S5 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 540 (now CMP® PowerClean Salt® or Jacuzzi® JSCS40)
The inner plastic ring on my CMP 540 has several cracks around the perimeter causing water to leak out of the housing. The salt generator is working fine. Is there a way to replace the plastic "cap" without replacing the entire cell? View answer
Asked 2 ´years ago | Salt Cells > APX PERFORMANCE S5 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 540 (now CMP® PowerClean Salt® or Jacuzzi® JSCS40)
I have the breeze 320 and the chlorinator will not shut off after the pump shuts off. I read that it has an internal flow sensor but it has no part number for this problem. View answer
Asked 2 ´years ago | Salt Chlorinators > CMP Powerclean Salt Ultra 320 Salt Chlorinator (SGS Saline Generating Systems Breeze 320) | 52000-220-000
I have had this unit for just over 4 months. The percent generating is no longer working. For the last week the chlorine level in the pool has been very high. I have been bringing the generation down from the normal 40% to 30%, 20% and finaly 10%. The cell generate light never turns off, no matter when I look at it, it is on, unless I go to 0%. How do I get warranty help with this? View answer
Asked 2 ´years ago | APX PERFORMANCE P40 Complete Salt Chlorine Generator
I just installed the INDIGO3-XL Ozone Generator for Swimming Pools that I ordered from you How can I see if it working and producing Ozone ?The Operation Guide shows :Section 4 ice Visual Inspection Periodically inspect the unit to ensure it is functioning correctly by simply observing the end plate gaskets for a light blue glow while the system is in operation.I do not have any light blue glow. The Unit is totally sealed, and I have no idea where a light blue glow may come. Does that mean that the new unit is not working ?Can I unscrew the Top cap to see if the VUV is turning blue when on ? View answer
Asked 2 ´years ago | Ozone > CircuPool INDIGO3-XL Ozone Generator for Swimming Pools
