Question 1

Where does metal coil get connected to? View answer

Asked 3 ´years ago | Parts > Custom Molded Plastics Inline 2" Zinc Anode & Water Bond with Copper Wire

Question 2

I hAve the hayward t15 cell is this a direct bolt on ? and I also have the prologic system with hayward vsp pump , do you guys sale a control that can replace the prologic to still use the remote cotrols ? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 3

does circupool 55 need to be removed when winterizing View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 4

Will this system fit the plumbing for a Resilience 5 blade salt cell? 40,000 gal. pool View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 5

I have a 20,000 gallon vinyl lined pool. I'm looking to change from chlorine to one of your Edge series units. Would I be better off with the Edge 25 or 40? Thanks. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 6

If I buy the system and the adapter to replace a Pentair, will I need to be gluing any pipes together or is everything threaded? In other words, do I need to buy glue or other installation tools make the switch? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 7

I am interested in the circupool core system but do not have an outlet near the equipment, do you have an installation demonstration that covers hardwiring the system? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 8

My in-ground pool is 5.5 ft at the deepest and3.5 in the shallow end and is approximately 16,000 gallons which Circupool Edge should I buy: Edge 25 or Edge 40? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 9

I have an inline chlorinator. Does it have to be eliminated when the conversion is made? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 10

I am looking to convert my 27ft above ground to salt. My filter is connected with flexible plumbing, can this be used with flexible plumbing, or will I need to have hard pvc installed? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 11

What is the water temperature that the Edge 40 system uses to shut off the salt cell during cold weather? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 12

Can the unit be installed vertically ? My plumbing would except this with little to no modifications if so. If not, not a big deal. I figured I'd ask. Thank you. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 13

I have RJ 20 system (6 years old},cell is over 3 years old.I did have low salt warning with correct salt level in pool, chlorine level was good.Now I have "no water flow" warning , Water flow is normal.chlorine production lower My question, do I have problem with cell? or problem with control unit? View answer

Asked 6 ´years ago | Salt Cells > CircuPool RJ20/AG16 Classic Replacement Cell (Electrode Only)

Question 14

The system I plan on replacing has a pressure spring located in a pipe that goes around the salt generator. Do I have to keep this pressure spring with the instalation of a new CORE 35 Salt Generator? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 15

I can't find the amps it uses for 110v and 220v? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 16

How long is the chord ? View answer

Asked 7 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 17

Is this chlorination reliable? We are replacing a Pentair. Can the Circupool 55 use the same power source as the Pentair IC - 40? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 18

I have a Breeze Slat Water Chlorinator.. It was put in about 4 years ago.. The cell kept getting gunked up with a white substanvce and the pool guy said he was cleaning it off every two weeks..doubtful - as since I came back for good it has not happened again..but now, the white cloudy substance (Chlorine) is not coming into the cell although the cell is still vibrating.. Is there a problem solving chart for this? Also, if I need to buy a new cell how do I knwo which one..Thank you for any help Mary View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 19

The status light on my Breeze Chlorinator board is flashing green. What does this indicate? Note: i just purchased a replacement cell from you and installed it.thanks View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 20

This looks like my SGS 3000 salt cell element , will it work on my system ? View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 21

have INTEX pool has a#11374 .titanium electrode.can"t find a replacement.anything compatable. View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 22

Does this item need to come off of the plumbing during the winter? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 23

i have a WAVE 20SGS2 salt system for my in-ground pool. my salt cell needs replacement, do you have a replacement salt cell that is compatible? View answer

Asked 5 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 320 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 24

Can you use a 540 salt cell on a 320 power source? View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 25

I currently have a Breeze 540 and I need to replace the cell. Can I upgrade the Cell to a 760 without changing the rest of the system? View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 26

Does it matter which way the water flows thru the CircuPool CORE-55 Salt Chlorine Generator? thanks View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 27

Installed your salt cell in my Breeze system . The blinking status light tells me it is not working. What should I check? View answer

Asked 4 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 28

does the placement height matter in relation to the height of the filter and or heater inlet and outlet? Some chlorinators state the chlorinator must be higher than the heater filter inlet /outlet. My current tablet feeder is low on the equipment pad and I am looking to convert to a salt water pool. With that in mind, can this chlorinator take the place of my tablet feeder? Thank you View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 29

My pool is approximately 17,800 gallons. Will a 3 cell breeze salt cell be enough to take care of chlorinating my pool? View answer

Asked 6 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 30

Do you expect to get these back in stock or should I look at an alternative? View answer

Asked 4 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 31

I have the SGS 540. Both the cell cap and cell base have hairline cracks and need replacing. Can I order the parts needed for replacement or do I need to replace the entire unit? Thanks! View answer

Asked 4 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 32

Am seeking Breeze 760 replacement generator cell from original manufacturer. Price? Reviews? View answer

Asked 5 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 760 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 33

My pipe size is 1.5 inch. I gather this system is 2” and I wish to install this unit in place of an in-line Hayward chlorination. Each hook up is screen fittings wit a threaded union. I want to make it easy and likely I will need the reducer from 2” to 1.5”. Any suggestions? View answer

Asked 5 ´years ago | Parts > CircuPool CORE Cell Adapter Kit - for existing Hayward® Salt Cell Plumbing

Question 34

is the edge 25 or 40 a direct replacement for a t-15 hayward ? approx 15000 gallons , THX ! View answer

Asked 4 ´years ago | CircuPool EDGE40 Replacement Salt Cell

Question 35

What is the cell cleaning process, is muriatic acid used like cleaning the intelichlor generator View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 36

When used while plugged into a 110 outlet, do you need to unplug it before the pool pump cycles off or is it ok to leave it plugged in? Will the flow sensor be ok to turn the unit off and on? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 37

If the SWG is plugged in rather than hard wired, what happens if the pump stops operating? Is there a low flow detection that stops the SWG? Could the interruption of water flow damage the unit? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 38

Can the CORE35 be installed vertically? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 39

Is there an aftermarket replacement salt cell for the Circupool Core35? View answer

Asked 2 ´years ago | CircuPool CORE35 Replacement Salt Cell

Question 40

Given the salinity level is kept within range for the Core 55 Generator and the cell is inspected/cleaned per manufacturers recommendations, what is the average lifespan of the titanium cell? Will this need to be replaced every season or will someone get multiple seasons of use out of the same cell? View answer

Asked 4 ´years ago | CircuPool CORE55 Replacement Salt Cell

Question 41

Will I need to do any work to put this in or need any tools? View answer

Asked 7 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 42

I see that the ic20 aftermarket replacement does more. My only worry is that it will run constantly. does the flow switch stop the salt generation when the pump is off? If so, I see no reason for the communication cable anyway. Is there any reason not to replace pentair with aftermarket? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 43

I am looking to replace my pentair Intellichlor ic 15 which has a plug in to outlet- will this fit and is it compatible View answer

Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 44

will it work with the easy touch system View answer

Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 45

Can it replace ichlor30 on fittings side? Capacity wise I’m fine w 20k gallons. View answer

Asked 5 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 46

Can the IC20 be mounted vertically since it appears the flow sensor is on the exit side of the flow? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 47

Will this unit work with the Intellicenter automation system from Pentair? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 48

What exactly is the super chlorination mode on the p20 ? And is it necessary at installation if the chlorine level in the pool is already between 1.0 and 4.0 ppm ? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 49

Will this work for a 13500 gallon pool? your instructions say 1.5 to 2 times the size, but not a maximum multiplier. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 50

Is the T-CELL-15 the same as the T-CELL-15-CUL and/or the T-CELL-15-SWP? Are the compatible? View answer

Asked 8 ´years ago | Salt Cells > Replacement W3 T-CELL-15 Turbo Cell for Hayward® AquaRite® (AQR15)

Browse by Topic

Tools