Question 1

When using a variable speed pump do you have to install the salt cell upside down? View answer

Asked 7 ´years ago | Salt Chlorinators > Hayward® Aqua Rite® W3 AQR15 (W3 T-Cell-15) Salt Chlorine Generator

Question 2

I have the CircuPool Core 35 series and my system error LED light is blinking..I have made sure I cleaned the cell with acid and my pool chemistry is correct and there is a small drip under the control panel. Will these rings help seal that better and maybe correct the light flashing? View answer

Asked 4 ´years ago | Parts > CircuPool RJ-Classic O-Ring Set

Question 3

When installing a Hayward T-cell 15 which way does it attach to the heat pump side, and which end attaches to the pump side? I assume it makes a difference?Thank you. View answer

Asked 8 ´years ago | Salt Cells > Replacement W3 T-CELL-15 Turbo Cell for Hayward® AquaRite® (AQR15)

Question 4

I have an IChlor 30 and would like to replace it with this unit.Will it be a direct fit replacement? View answer

Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 5

what is the difference between the Hayward Aquarite T-15 and the Hayward Aquarite Turbo T-15 Cell? View answer

Asked 9 ´years ago | Salt Cells > Replacement W3 T-CELL-15 Turbo Cell for Hayward® AquaRite® (AQR15)

Question 6

Does the APX P-Cell tell you the specific salinity level or only if salinity is within range? View answer

Asked 25 ´days ago | Support

Question 7

Can you provide install documents or similar on the inner replacement cell, to determine if it is a good option?

Asked 2 ´months ago

Question 8

How many operational hours can I expect this to last? I understand the Pentair has a 10,000 hour life. View answer

Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 9

What is the required GPM for the CircuPool RJ-60 PLUS generator? View answer

Asked 16 ´days ago | Salt Chlorinators > CircuPool RJ-60 PLUS Salt Chlorine Generator

Question 10

Is the cell covered under warranty on the RJ20 View answer

Asked 1 ´month ago | Salt Cells > CircuPool RJ20/AG16 Classic Replacement Cell (Electrode Only)

Question 11

I’m considering replacing my 5-year old Pentair IC40 with the Core 55. Will the Core 55 wiring plug/twist easily into my intellitouch control center? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 12

Ate these good for above ground pools? View answer

Asked 1 ´year ago

Question 13

I have the APX P40, where is the water temperature sensor sensor? In flow switch or in the cell? View answer

Asked 3 ´months ago

Question 14

is it compatible with my pentair intellichem system? View answer

Asked 12 ´days ago | Salt Chlorinators

Question 15

can the CircuPool SmartFlo 1.5THP handle 15,000 gal pool? View answer

Asked 4 ´years ago | [categoryname] > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 16

How do I recalibrate the salt level? View answer

Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 17

Does it let you know how much cell life is left? View answer

Asked 1 ´month ago | Salt Chlorinators > E-CHLOR Plug-In Electronic Chlorine Generator | APX PERFORMANCE | For Pools up to 32,000 Gallons

Question 18

Do you need to run your pool pump more if you switch to salt View answer

Asked 1 ´year ago

Question 19

Operating hours View answer

Asked 4 ´months ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 20

how do you determine the flow direction? is it right to left with the cord being on the left? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 21

what unit would be good for a 17,000 gal. pool View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 22

How do I know if my salt cell is at end of life View answer

Asked 10 ´months ago | Salt Cells

Question 23

How is it 50% cheaper View answer

Asked 5 ´months ago

Question 24

What is good to add to a salt pool to keep liner from fading and last longer? View answer

Asked 3 ´months ago

Question 25

Can this control unit be exposed to the elements? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 26

Does this work with Hayward AquaLogic? I see it says AquaRite. View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE V15 Aftermarket Replacement Cell fits Hayward® AquaRite® T-15 Cell for 40,000 Gallons Max

Question 27

What is the threaded top 1/2" or 3/4"? View answer

Asked 16 ´days ago | Parts > Flow Switch Housing

Question 28

Will this cell replace a Hayward S 340 t cell? View answer

Asked 4 ´months ago

Question 29

What is the power (DC or AC, voltage and amperage) for the PPC3 replacement salt cell? View answer

Asked 7 ´years ago | Salt Cells > Autopilot PPC3 Replacement Salt Cell (for RC-42, SC-48 cells)

Question 30

Where do I buy the salt for a 8500 gallon pool View answer

Asked 4 ´months ago | pH Controls

Question 31

My current Pentaire I 40TH (I think) allows me to view, change percentage output and read salt level thru my phone app....will this allow me to do the same via the app? if not, are there any? View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 32

Does it included the power cord and 2 unions as pictured? View answer

Asked 9 ´years ago

Question 33

Who can I tell direction on cell View answer

Asked 1 ´month ago

Question 34

Who gives the tech support for this unit ? You or manufacturer ? Same question but in reference to warranty ? View answer

Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons

Question 35

Will this match up with IC40 hookups? I am less than 20k gal. View answer

Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons

Question 36

Can just the cell be replaced on this, or will the whole unit need to be replaced? View answer

Asked 11 ´months ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 37

i bought and installed a RJ+45 in 2017, will a replacement cell bought today "bolt" right in with no plumbing adjus

Asked 2 ´months ago

Question 38

What housing fits this model? View answer

Asked 4 ´months ago

Question 39

Do you expect to get these back in stock or should I look at an alternative? View answer

Asked 4 ´years ago | Salt Cells > Saline Generating Systems SGS Breeze 540 Replacement Salt Cell (now CMP Powerclean Salt Ultra)

Question 40

How do you clean the salt cell? Do you need acid? View answer

Asked 6 ´years ago

Question 41

I'm a poolman. We have well water. Scaling is a problem that makes the water very hard. How can you have a salt pool with hard water? View answer

Asked 2 ´months ago | Salt Chlorinators

Question 42

I just installed a GFS Generic Flow Switch that I bought from your website. Will it work with this system, or will I need to replace it with the unit that comes with the package? View answer

Asked 9 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 43

what type of sand and how many LBS can I use in this filter? I read there are 3 different types of sand available for filtration View answer

Asked 2 ´years ago | Filters > Waterco Micron S602 ECO -24 " Sand Filter - Top Mount 2" Plumbing

Question 44

Hi all,can I change my RJ30+ cell into a RJ60+?How much is the price for this? My old system model RJ30+ has the serial #: 05AB0DA4D2020066.ThanksJens View answer

Asked 2 ´years ago | Salt Cells > CircuPool RJ60 Classic Replacement Cell (Electrode Only)

Question 45

Just bought the edge 40 and the control module has bare ends for the power source. My pool doe not have a timer but I do have an outlet next to my pump. Can I wire this to use a plug for the out? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 46

Where would I connect edge 40 power to on a variable speed intelliflo pump that has internal timer? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 47

I need a replacement plastic cover for the 320 Breeze generator, my cover craked and broke with sun exposure. Is there a way to get this part alone? View answer

Asked 5 ´years ago | Salt Chlorinators > CMP Powerclean Salt Ultra 320 Salt Chlorinator (SGS Saline Generating Systems Breeze 320) | 52000-220-000

Question 48

if purchased now while on sale but will not install until the first of May, when will the warranty start? View answer

Asked 3 ´months ago

Question 49

My pool is green, have not opened for the season yet. Do I need to get it clear before converting? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 50

does it work with Hayward Omni Logic automation? View answer

Asked 3 ´months ago

Browse by Topic

Tools