I wonder about how long a unit would have to run to provide adequate chlorination?For example, I have an 18,000 gallon inground pool with a single stage 1 1/2 HP pump, if I was to purchase the sj-40 (or even the sj-55) how long would it have to run per day to keep the pool chlorinated? More or less. View answer
Asked 8 ´years ago | CircuPool SJ-45 Salt Chlorine Generator
My pool is in ground about 28,000 gallons. Is is better to stay with the 35 or is bigger better? My thoughts are, if you go bigger, say the 55, then your putting less demand on the unit and the cell for desired chlorine output and it would in turn last longer and be more cost effective. Does this sound logical? View answer
Asked 5 ´years ago | CircuPool CORE-15 Salt Chlorine Generator
Will this work with a Hayward Aqua Plus Goldline, main software revision 4.3 ? Pool 16'x32'x4' 0r 16,384 gallons? Yes or No ? Can it be shipped free in 24 hours ? You on Amazon? View answer
Asked 10 ´months ago | Salt Cells > CircuPool® CIR-GEN9 Aftermarket Replacement Cell fits Hayward® AquaRite® 25,000 Gal. Models
I have RJ 20 system (6 years old},cell is over 3 years old.I did have low salt warning with correct salt level in pool, chlorine level was good.Now I have "no water flow" warning , Water flow is normal.chlorine production lower My question, do I have problem with cell? or problem with control unit? View answer
Asked 6 ´years ago | CircuPool RJ20/AG16 Classic Replacement Cell (Electrode Only)
It looks like the unit is separated into 2 parts, the electronics and the cell. If I buy this unit, and it eventually fails, can I just replace the cell itself. How much is just the replacement cell? View answer
Asked 10 ´months ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
I’m looking at buying a new 18’x48” pool and putting this on first thing. Do I need to first add chemicals to get it balanced, or can I just throw in some salt, plop this thing in and let it do its job? Thanks View answer
Asked 10 ´months ago | Saltron Retro Chlorine Generator For Above Ground Pools | SOLAXX | Plug-In Model
Currently have a Blue Essence Salt Cell Serial # 2E1339-200469, will this Hayward/Aqua-rite T15 be the same exact size and including the connector that plusg into existing control panel? View answer
Asked 7 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models
Will this fit for a Jandy PLC1400? View answer
Asked 8 ´months ago | Parts > Bypass Cell (fits Pentair® IntelliChlor® Salt Systems)
I have the jacuzzi jss 40 I need to replace. Do you have a direct fit? Also my generator is wired into same circuit as pump but the pump has internal timer so the swg has power all the time.just stops when it detects low flow. Is this an issue? View answer
Asked 10 ´months ago | CircuPool SJ-45 Salt Chlorine Generator
Can this Breeze 760 cell be used in a wave model 540 unit to give more chlorine generation or does the controller also need to be changed? And would it fit in the same housing that the 540 cell uses? View answer
Asked 10 ´months ago | Salt Cells > Saline Generating Systems SGS Breeze 760 Replacement Salt Cell (now CMP Powerclean Salt Ultra)
Is salt water cheaper because less evaporation? View answer
Asked 7 ´months ago
I’m looking at the CS30-ECP0312 generator system. Just to confirm, that comes with the power supply? Is there anything else I need to make the system work besides obvious salt, etc? Thank you. View answer
Asked 4 ´years ago | Salt Chlorinators > AutoPilot Pool Pilot® Evolve + PPM1 Manifold for 30,000 gallon pools
I have a 40000 gallon pool with a hayward aquarite goldline plus system. My old cell kept giving a low salt reading so i put in more salt several times but it did not change. I ordered your replacement cell and the diagnostics said 6400 ppm salt level. I drained maybe 15,000 gallons and refilled it and the salt reading in diagnostics is still 6400 ppm. Any suggestions? View answer
Asked 2 ´years ago | Salt Cells > CircuPool® GEN15 Aftermarket Replacement Cell fits Hayward® AquaRite® 40,000 Gal. Models
what is the difference between SJ & the RJ systems? View answer
Asked 9 ´years ago
Will this work for the IC40 Cell? View answer
Asked 2 ´years ago | [categoryname] > APX PERFORMANCE P-Series Flow Switch for P20, P40, P60
My error message reads cell connection View answer
Asked 10 ´months ago | Parts / Accessories
