I'm looking for a replacement for ECOmatic ESC 16, 240V up to 15,000 gal. I note it is out of stock. Will you be getting more replacement items for this system, or is there something else that will work? I was told I have an issue with the control box as well although it is currently still working. What is recommended? If I haven't given you adequate info please tell me what you need? View answer
Asked 2 ´years ago | Salt Cells > APX PERFORMANCE E13 Aftermarket Replacement Cell fits Ecomatic® ESC24 / ESC36 / ESC48 Salt Cell
I have a Monarch pool systems ESC36 min salt level 3000 ppm (eco matic). Pool guy says salt cell not working. What is the exact replacement you recommend and how long does it last. Thank you View answer
Asked 2 ´years ago | Salt Cells > APX PERFORMANCE E13 Aftermarket Replacement Cell fits Ecomatic® ESC24 / ESC36 / ESC48 Salt Cell
Is the ""low salt"" and ""high salt"" determined in the RJ-45 Plus salt generating cell? I have lately have had the controller show ""low salt"" and ""check cell"" and I have carefully cleaned the cell as instructed 3 times in the last 4 weeks View answer
Asked 5 ´years ago | Salt Cells > CircuPool® RJ-45 PLUS Replacement Cell
Have a pool using a Hayward Aqua-rite T-3 is this T-9 a direct replacement? Would like to increase output. I know I will have to reprogram the control unit. Are control units same for all sizes of cells? When I say direct replacement I mean no plumbing, just unscrew old and xxxx on the new plus reprogram of course. View answer
Asked 8 ´years ago | Salt Cells > CircuPool® CIR-GEN9 Aftermarket Replacement Cell fits Hayward® AquaRite® 25,000 Gal. Models
Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer
Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says ""inspect cell"". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer
Asked 2 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
What is the maintenance like to acid wash the cell, for pentair I used a ""stand"" on the cell with a water / acid mix, does this use the same kinda stand? View answer
Asked 1 ´year ago | Salt Cells > APX PERFORMANCE P20 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC20® Cells | up to 20,000 gallons
I have a Jandy AquaLink RS system but dont know how loosing the ""RS-485 or data connection"" will affect me? The AquaLink RS has an indoor control panel program timer to automatically start/stop the equipment - will this salt cell still start/stop on that timer? View answer
Asked 3 ´years ago | Salt Cells > APX PERFORMANCE P60 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC60® Salt Cells | up to 60,000 gallons
The inner plastic ring on my CMP 540 has several cracks around the perimeter causing water to leak out of the housing. The salt generator is working fine. Is there a way to replace the plastic ""cap"" without replacing the entire cell? View answer
Asked 2 ´years ago | Salt Cells > APX PERFORMANCE S5 Aftermarket Replacement Cell fits Saline Generating Systems® Breeze® 540 (now CMP® PowerClean Salt® or Jacuzzi® JSCS40)
I have an 8000 gallon pool. I need to replace the salt cell that has failed. The failed cell was a Hayward TCELL940. I believe this salt cell was a little bit of an overkill when installed. What would be a good aftermarket replacement cell. View answer
Asked 1 ´year ago | Salt Cells > APX PERFORMANCE V9 Aftermarket Replacement Cell fits Hayward® AquaRite® T-CELL-9® for 25,000 Gallons Max
Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer
Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
Is the ""low salt"" and ""high salt"" determined in the RJ-45 Plus salt generating cell? I have lately have had the controller show ""low salt"" and ""check cell"" and I have carefully cleaned the cell as instructed 3 times in the last 4 weeks View answer
Asked 5 ´years ago | Salt Cells > CircuPool® RJ-45 PLUS Replacement Cell
Have a pool using a Hayward Aqua-rite T-3 is this T-9 a direct replacement? Would like to increase output. I know I will have to reprogram the control unit. Are control units same for all sizes of cells? When I say direct replacement I mean no plumbing, just unscrew old and xxxx on the new plus reprogram of course. View answer
Asked 8 ´years ago | Salt Cells > CircuPool® CIR-GEN9 Aftermarket Replacement Cell fits Hayward® AquaRite® 25,000 Gal. Models
Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer
Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
Is the ""low salt"" and ""high salt"" determined in the RJ-45 Plus salt generating cell? I have lately have had the controller show ""low salt"" and ""check cell"" and I have carefully cleaned the cell as instructed 3 times in the last 4 weeks View answer
Asked 5 ´years ago | Salt Cells > CircuPool® RJ-45 PLUS Replacement Cell
Have a pool using a Hayward Aqua-rite T-3 is this T-9 a direct replacement? Would like to increase output. I know I will have to reprogram the control unit. Are control units same for all sizes of cells? When I say direct replacement I mean no plumbing, just unscrew old and xxxx on the new plus reprogram of course. View answer
Asked 8 ´years ago | Salt Cells > CircuPool® CIR-GEN9 Aftermarket Replacement Cell fits Hayward® AquaRite® 25,000 Gal. Models
Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer
Asked 4 ´years ago | Salt Cells > APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons
