Salt Chlorinators Q&A

Question 1

Has anyone had a problem with their control panel not getting power? My pump will run but no display or power on the control panel. wired it according to instructions, checked the internal fuse and try the reset button. Nothing View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 2

Will the temperature of the water damage the CORE-35? I was told that most salt chlorinators will be ruined if they are ran when water is under 70 degrees. Seemed odd but figured it was worth asking. View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 3

I have a 18x36. Est 33,500. What size generator do I need? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 4

I have an Aquqlink 2.0 system. the power to the pump is linked thru low voltage for operation. How do I install to operate with this system . View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 5

Can the flow switch with the RJ45+ system be installed in a vertical position following a 90 degree elbow after where the cell is installed (horizontally)? This is the portion of the pipe before that is still visible before it goes underground to return water to the pool (i.e. the last point before water returns to the pool). View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 6

At 110v was size breaker is needed. View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 7

what flow rate does this require to activate View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 8

Is this system large enough for a 15k gallon pool or is it better to upgrade?Does it come with instructions?Is it recommended to wire the salt cell yo run with the pump?Thanks! View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 9

How often does the cell have to be replaced? I have a 30,000 gallon pool and am looking at the RJ45. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 10

Can you use a SJ-20 on a pool that holds 4500 gal water by using on lowest setting? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 11

Does this system control the pump, have breakers and control the lights? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 12

I'm currently using Baquicil and am thinking about changing over to salt. I haven't opened the pool yet (New York) but will do so in a week or so. Chemical levels will be low and thinking it would the right time make the conversion. What do I need to do? Any interaction between latent Baquicil and salt? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool SJ-20 Salt Chlorine Generator

Question 13

I have an IC 20 will the Universal40 work without having to do additional plumbing? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 14

I am adding a salt water system to a 40000 gal pool, when I do a liner change. Is this all I need? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 15

How much is the replacement cost for the "CircuPool RJ-30 PLUS Salt Chlorine Generator"? View answer

Asked 8 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 16

I have a Compupool Titanium 60K salt generator that seems to have died. Displays only software version. Will not reboot. Salt Pro direct has not replied. Warranty still in effect. Is customer service and reliability any better? Have gone through 4 cells in 4 years, but still a PIA. View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 17

is the cell self cleaning if not how do you clean it? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 18

I am replacing a Hayward Aquarite system. My pool is about 10,000 gallons. Should I go with the Circu Pool universal 40 generator, or the universal 25 generator? Thank you View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 19

Does this generator indicate the salt level? What is the salt ppm range? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 20

Can the RJ-45 Plus replace a Jandy PLC1400 system without having to redo any plumbing? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 21

Its says self cleaning, is that true and do you ever have to do a acid soak? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 22

Will this communicate with Jandy Aqualink? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 23

If using a variable speed pump which uses its on control board, how does the Salt generator come on and detect that the pump is on if it is connected to an external GFCI outlet? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-35 Salt Chlorine Generator

Question 24

How to do you change voltage from 220 to 115?? View answer

Asked 7 ´years ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 25

Can the unit be installed vertically ? My plumbing would except this with little to no modifications if so. If not, not a big deal. I figured I'd ask. Thank you. View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool EDGE-40 Salt Chlorine Generator

Question 26

With a variable speed pump will it generate desired out put on low speed setting? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 27

Is the physical size of the RJ series compatible with an IntelliChlor IC40? or will I have to do plumbing work? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool RJ-30 PLUS Salt Chlorine Generator

Question 28

Do I need to wait for my chlorine level to drop low before converting over to a salt water pool? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-15 Salt Chlorine Generator

Question 29

Can you replace the cells after they wear out? View answer

Asked 6 ´years ago | Salt Chlorinators > ControlOMatic - MegaChlor Pool and Swim Spa Chlorine Generator

Question 30

Looking to buy a MegaChlor-CD for my 6,500 gal. above ground pool. What exactly is the CM-PS -HIDE. Is it a mounting box so the control unit is not exposed to the elements? View answer

Asked 2 ´years ago | Salt Chlorinators > ControlOMatic - MegaChlor Pool and Swim Spa Chlorine Generator

Question 31

I HAVE AN ORIGINAL GOLDLINE AQUARITE T15. WILL THIS BE A NO CUT INSTALLATION AS FAR AS THE CELL IS CONCERNED?.... WOULD I BE ABLE TO USE THE OLD T15 SALT GENERATOR WITH THE NEW SYSTEM? View answer

Asked 8 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 32

For new installation, what length of pipe must be removed for installation of salt cell? Space is limited. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 33

What is the power requirement for the system? I have a 220 volt feed for the pump. I plan to install it myself. View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 34

I have a circu pool si Sisries that is wore out will this one replace it? My pool is 25,000 gallons View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 35

When converting to a salt generator, do I need to buy bags of salt to start it out? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 36

How much return line space is needed for the Universal 55 flow switch and cell? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool Universal55 Salt Chlorine Generator

Question 37

Does the 3 year warranty replace the cell or repair it View answer

Asked 10 ´months ago | Salt Chlorinators > E-CHLOR Plug-In Electronic Chlorine Generator | APX PERFORMANCE | For Pools up to 32,000 Gallons

Question 38

I need to replace a failing Zodiac Clearwater LM2-24 SWG, for 20,000 gal vinyl pool, very shaded and covered. Will this fit easily without needing to re plumb? View answer

Asked 1 ´year ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 39

Is this the complete kit ? Aka everything I need for setup ? I don’t want to purchase and find out I need to spend more View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 40

Does this come with a flow switch it appears there is one in the photos. Also is it hard wired or can it be ? View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool SJ-45 Salt Chlorine Generator

Question 41

I have the jacuzzi jss 40 I need to replace. Do you have a direct fit? Also my generator is wired into same circuit as pump but the pump has internal timer so the swg has power all the time.just stops when it detects low flow. Is this an issue? View answer

Asked 1 ´year ago | Salt Chlorinators > CircuPool SJ-45 Salt Chlorine Generator

Question 42

Can i buy just the generator. I have a cell the is only 30 days old so it is good but my base unit has failed. View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 43

I have 1 1/2 “ plumbing will this work for meThank you Jeff View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool EDGE-15 Salt Chlorine Generator

Question 44

I take it this unit (Umiversal 40) will replace a Jandy and be more than efficient on a 30,000 gallon pool or would I be better off choosing the upgraded R30 to R45? I might be wrong on the model initial. I cant change pages without loosing my Question page but I'm sure you get the idea, right? View answer

Asked 8 ´years ago | Salt Chlorinators > CircuPool Universal40 Salt Chlorine Generator

Question 45

I have an above ground pool and it doesn't have any pvc lines other than the main drain. Will this connect to the hoses with a hose clamp and work? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 46

I bought a circu gen t-15 from you guys last November it has quit working what do I do next to get it replaced View answer

Asked 2 ´years ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Question 47

I run my filter continuously from spring opening to fall closing, will this work with the SJ-40 or do you need a timer? View answer

Asked 8 ´years ago | Salt Chlorinators > CircuPool SJ-45 Salt Chlorine Generator

Question 48

Unit turns on but when I push buttons nothing happens . Unit doesn't respond to push buttons View answer

Asked 11 ´months ago | Salt Chlorinators > CircuPool RJ-45 PLUS Salt Chlorine Generator

Question 49

What is the size of intake and outtake connector? View answer

Asked 4 ´years ago | Salt Chlorinators > AutoPilot Pool Pilot® Evolve + PPM1 Manifold for 30,000 gallon pools

Question 50

will this work with Hayward T-Cells View answer

Asked 1 ´year ago | Salt Chlorinators > CircuPool Universal25 Salt Chlorine Generator

Salt Chlorinators Q&A

Activity timeframe

Browse by Category

Browse by Category

Browse by Topic

Tools