APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons Q&A

Question 1

Why do I get a com link error on the Pentair control panel? It is not reading the salt level. View answer

Asked 10 ´months ago

Question 2

It looks like the unit is separated into 2 parts, the electronics and the cell. If I buy this unit, and it eventually fails, can I just replace the cell itself. How much is just the replacement cell? View answer

Asked 1 ´year ago

Question 3

If I have a P40 and the cell reaches its end of life, I just need to buy the APX PERFORMANCE P-Series Inner Replacement Cell for the P40 (Housing and Electrode Only) , correct? View answer

Asked 1 ´year ago

Question 4

I have 20,000 gal pool, is there a reason why I have a ic40 Pentair salt generator? I really like the generic Pentair salt generator View answer

Asked 5 ´years ago

Question 5

If I run my pump for 12 hours a day do I need to turn off the cell or will it stop when the pump is off? View answer

Asked 18 ´days ago

Question 6

Can I turn the control panel both ways? My current Pentair panel must be installed upside down due to the flow. View answer

Asked 2 ´years ago

Question 7

I have the APX P40, where is the water temperature sensor sensor? In flow switch or in the cell? View answer

Asked 2 ´months ago

Question 8

I have a intellichlor ic15 and it failed on me. Should I go with the ic40 upgrade so I can see the salt reading? View answer

Asked 5 ´years ago

Question 9

Does this cell need to be installed vertically like the Pentair Intellichlor cell? View answer

Asked 5 ´years ago

Question 10

Will I be able to adjust The chlorinator on an app through my phone with this generic brand View answer

Asked 1 ´year ago

Question 11

if I install the unit with the flow I have,I will be reading it upside down is there an easy fix? View answer

Asked 6 ´years ago

Question 12

What are the dimensions? Can this product be installed horizontally? View answer

Asked 3 ´years ago

Question 13

I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says "inspect cell". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer

Asked 2 ´years ago

Question 14

Why do you think your generic unit is better than the Pentair ic40?tks View answer

Asked 6 ´years ago

Question 15

Does this unit have the 24 hour 'Boost' option like the pentair IC40? View answer

Asked 4 ´years ago

Question 16

Who provides the warranty service on this item? If I buy it and need warranty service do I go through the manufacturer or through DSP.com? View answer

Asked 6 ´years ago

Question 17

How long does it take for the system to check the water flow after installation?

Asked 25 ´days ago

Question 18

The flow switch has failed on my IC 40 before. Can the flow switch be replaced on this unit, and do you carry the part? View answer

Asked 5 ´years ago

Question 19

Can your Pentair IC40 replacement cell be installed vertically? Is there an advantage or disadvantage to doing so? View answer

Asked 1 ´year ago

Question 20

can I adjust the temp and salt readings on the unit View answer

Asked 5 ´years ago

Question 21

To clean plates, do you remove top section panel each time View answer

Asked 1 ´month ago

Question 22

Hello.How can I have the LCD display backlight be on all the time ? It would be convenient to see it at a glance insted of having to go over to it and press the button View answer

Asked 2 ´years ago

Question 23

How do I recalibrate the salt level? View answer

Asked 4 ´years ago

Question 24

The installation manual says to mount horizontally on page 12 and vertically on 21. Which is it? On my original piping, mounting vertically puts the unit upside down. View answer

Asked 5 ´years ago

Question 25

my cell keeps blinking green and my chlorine does not register on my test strips. does this mean my salt cell is no longer working? View answer

Asked 5 ´years ago

Question 26

I am going to use this salt cell to replace my Ichlor 30. Will this come with an install template?? View answer

Asked 12 ´months ago

Question 27

I have the Pentair EasyTouch automation center and the IC40 salt cell, which is bad now. Will the APX P40 or P60 work with the controller. I just need power from the EasyTouch correct? It won't read salt level or any control from the EasyTouch unit Correct. Also, can I use the P60 instead of the P40. We have 38500-gallon pool. View answer

Asked 10 ´months ago

Question 28

add says free shipping but checkout shows 22.00. which is it? View answer

Asked 2 ´years ago

Question 29

I have an ichlor 30 pentair system. Will an IC 40 apex replacement cell be compatible with my pentair power supply? View answer

Asked 2 ´years ago

Question 30

Can I replace the Flow sensor only on the cell O can’t seem to find it anywhere. View answer

Asked 3 ´years ago

Question 31

Do I need a power box or can I just buy this unit and plumb it in? I don't currently have a salt generator. View answer

Asked 1 ´year ago

Question 32

My Pentair Intellichlor salt chlorine generator model 40 is not working I have spent over $500 in chemicals the last month it’s not producing it’s chlorine but I do not know the difference between a cell and a generator which one do I need the generator or the cell? Are they the same? Thank you for your help. View answer

Asked 11 ´months ago

Question 33

I didn’t see a cleaning cap in my box / what does it look like and where can I get it? View answer

Asked 11 ´months ago

Question 34

what is the flow direction in and out View answer

Asked 4 ´years ago

Question 35

If this APX cell goes bad in the future can I just replace the cell and not the control module? View answer

Asked 10 ´months ago

Question 36

Does it come with the PVC fittings that xxxx onto to the ends? The old ones on my Intellichlor are cracked and they have a slow drip leak. View answer

Asked 5 ´years ago

Question 37

We have a IC15. will your IC40 fits in our space and how much more ac power would it need per year? View answer

Asked 7 ´months ago

Question 38

Does it have Ability to communicate with EasyTouch Automation Systems? View answer

Asked 2 ´months ago

Question 39

Hi- Will this work with the Pentair Acid injection system? Thanks View answer

Asked 6 ´years ago

Question 40

We received our replacement generator for our Pentair Intellichlor 40 but inside the cable it has 2 prongs and our old one has 4 prongs? View answer

Asked 6 ´years ago

Question 41

Are parts available for this unit? (Flow meter switch) Is a standard Pentair flow switch compatible with this unit? View answer

Asked 6 ´years ago

Question 42

Will this drop in and replace my pentair IC40? Same specs? View answer

Asked 6 ´years ago

Question 43

I have an 18000 gallon pool. What size salt cell to replace my third bad Pentair ic30 View answer

Asked 1 ´month ago

Question 44

Is the manual available on line so I can look at it now? View answer

Asked 6 ´years ago

Question 45

Will I have to modify the plumbing to use this item? View answer

Asked 28 ´days ago

Question 46

Is there a way to adjust the LCD screen's view angle? It's only readable when my eyes are level with it. View answer

Asked 6 ´days ago

Question 47

I bought a CIFCGEN IC40 from you March 1, 2022. It has worked fine. Now, however, the light is on that says ""inspect cell"". The troubleshooting guide says this could mean it needs to be cleaned. I tried that and the light is still on. Do you think it is simply used up. Is there any way to check to see if it has any life left? View answer

Asked 2 ´years ago

Question 48

I have an existing Ichlor 30 salt generator. Would this APX P40 cell be a direct replacement ? View answers

Asked 4 ´months ago

Question 49

Is the IC60 the same size as the IC 40? View answer

Asked 3 ´months ago

Question 50

Does this salt cell need an app and WiFi View answer

Asked 11 ´months ago

APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons Q&A

Activity timeframe

View More Product Details

Related Product

Browse by Topic

Tools