Question 1

I am having my pool Replastered 32k Inground next few months. Currently use chlorine tabs. I use city water so after Cleaning my filter and putting in new sand will it be ok to just start it up normally and then test the water ? View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 2

Can this unit be installed vertically View answer

Asked 3 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 3

The provided power cable will not be long enough to reach my timer box. How would you recommend extending it to be hard-wired to the timer box? View answer

Asked 1 ´year ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 4

After 8 years, if I need a replacement what might the cost be as the entire thing would not need to be replaced? Thanks. View answer

Asked 10 ´months ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 5

I just bought the entire system, I’m wondering if storing a replacement salt cell is ok or problematic because it could be stored for 3-7 years maybe longer cuz I bought an oversized 1 ? View answer

Asked 5 ´months ago | CircuPool® RJ-60 Replacement Cell

Question 6

Can this be installed on a pipe that goes down at a diagonal slant, or does it need to stay horizontal? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 7

On first conversion to a salt pool, do you add all the salt at once or some each day. I have a 35,000 gallon chlorine pool View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 8

How long is the electric cord on the Core55? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 9

Can it be installed before the heater? My current Chlorinator is in a very tight location and I would like to relocate this for ease of access. Please advise. View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 10

The installation video says it’s easy to convert the system to work with 1.5in pipe but doesn’t say how? What is the best way to do this? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 11

I have a jandy salt chlorianator and the cells do not last more than 2-3 seasons due to high calcium build up--despite cleanings--Does this newer salt generator last longer and have fewer issues with calcium build up since very frustrated with the short life-span? thx View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 12

Will the power box for my Intelichlor I40 work with the Replacement Cell for Intelichlor 40 Generic upgrade? View answer

Asked 6 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 13

The generate light is flashing green. What does this mean? All other lights are sold green. View answer

Asked 6 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 14

Who provides the warranty service on this item? If I buy it and need warranty service do I go through the manufacturer or through DSP.com? View answer

Asked 6 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 15

does the cell still need to be cleaned and if so how often? View answer

Asked 6 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 16

I have a core35 unit plugged into Gfci outlet. Does the unit automatically turn off when pump stops running? Or do I need to directly connect unit to timer? Thank you. View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 17

Can you install it vertically? The pipe comes out of my heater, and then immediately bends 90-degrees down, with about 2.5 feet of straight vertical drop before it goes into the ground. Or, in that situation, would you recommend a different model, such as the RJ, Edge, or Universal? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 18

what size pvc is it View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 19

Can I install this vertical as it will be replacing my Pentair i40 which too is vertical. Hopefully those cuts work so I don’t have to cut elsewhere View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 20

What is the target salinity level for the Core55? View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 21

Just bought the circupool core 35 from you would like to know how to hook it to the 220v line I now have on the timer for my old cell. Do I remove the 110v line on product or can I just remove the plug from cord and attach to the 220v line (after power is off) Thanks in advance! View answer

Asked 4 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 22

does circupool 55 need to be removed when winterizing View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 23

Can I plug this into the pentair easy touch panel? Will it have enough power to run this ? View answer

Asked 6 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 24

I am building an 80,000 gallon in-ground pool.What size generator(s) should I use and what configuration? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 25

I am interested in the circupool core system but do not have an outlet near the equipment, do you have an installation demonstration that covers hardwiring the system? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 26

would it work with 3/4 hp pump? View answer

Asked 5 ´months ago | Filters > CircuPool® CJ-2750 Cartridge Filter

Question 27

I currently have a 40,000gal below ground chlorine pool and would like to switch to salt system but I just had to replace my Hayward filter tank. Can I still use the same filter tank with a salt system or would I have to get a new one? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 28

What is the length of the cell for the 40 unit?Can just the cell be replaced when it reaches the end of its life cycle? Cost?I have a hardwired Pentair IC40. How difficult will it be to switch over wiring to your unit? View answer

Asked 5 ´months ago | CircuPool EDGE-40 Salt Chlorine Generator

Question 29

I can't find the amps it uses for 110v and 220v? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 30

can this system be used on above ground pools? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 31

Is this chlorination reliable? We are replacing a Pentair. Can the Circupool 55 use the same power source as the Pentair IC - 40? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 32

Does this item need to come off of the plumbing during the winter? View answer

Asked 6 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 33

Does it matter which way the water flows thru the CircuPool CORE-55 Salt Chlorine Generator? thanks View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 34

Can you replace the anode in this product? If so what is the part number? View answer

Asked 5 ´months ago | Parts > Solaxx Inline 2" Zinc Anode & Water Bond with Copper Wire

Question 35

What is the cell cleaning process, is muriatic acid used like cleaning the intelichlor generator View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 36

When used while plugged into a 110 outlet, do you need to unplug it before the pool pump cycles off or is it ok to leave it plugged in? Will the flow sensor be ok to turn the unit off and on? View answer

Asked 5 ´years ago | Salt Chlorinators > CircuPool CORE-55 Salt Chlorine Generator

Question 37

If the SWG is plugged in rather than hard wired, what happens if the pump stops operating? Is there a low flow detection that stops the SWG? Could the interruption of water flow damage the unit? View answer

Asked 1 ´year ago | CircuPool CORE-35 Salt Chlorine Generator

Question 38

I didn’t see a cleaning cap in my box / what does it look like and where can I get it? View answer

Asked 5 ´months ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 39

Can the CORE35 be installed vertically? View answer

Asked 1 ´year ago | CircuPool CORE-35 Salt Chlorine Generator

Question 40

The flow switch has failed on my IC 40 before. Can the flow switch be replaced on this unit, and do you carry the part? View answer

Asked 5 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 41

Is the manual available on line so I can look at it now? View answer

Asked 6 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 42

I HAVE A 18X48 POOL WHAT SIZE FILTER DO I NEED ABOVE GROUND View answer

Asked 6 ´months ago | Pumps > Speck A91 - Above Ground Swimming Pool Pump - 3/4 THP - 1.5 in Unions

Question 43

Do you sell the replacement cells for this? I am wondering how much they cost. View answer

Asked 2 ´years ago | CircuPool CORE-35 Salt Chlorine Generator

Question 44

Are the Electrolytic cells replaceable ? View answer

Asked 3 ´years ago | CircuPool CORE-35 Salt Chlorine Generator

Question 45

I am going to use this salt cell to replace my Ichlor 30. Will this come with an install template?? View answer

Asked 6 ´months ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 46

Delivery time to Southern California zip 92344 View answer

Asked 6 ´months ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Question 47

I have a Pentair Ichlor IC 30. I asume this unit will work with the same Pentair power center? Just different dimensions for the piping install? View answer

Asked 2 ´years ago | APX PERFORMANCE P40 Aftermarket Replacement Cell fits Pentair® IntelliChlor® IC40® Salt Cells | up to 40,000 gallons

Question 48

Can a power cord be installed on the control panel to directly plug into a wall outlet? View answer

Asked 6 ´months ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 49

I have an inground pool that is approximately 17k gallons and would like to know if the SJ35 would be a good choice for a replacement chlorine generator. I currently have a Breeze 320 that is not working and noticed that the SJ35 is similar in appearance and installation. View answer

Asked 6 ´months ago | Salt Chlorinators > CircuPool SJ-35 Salt Chlorine Generator

Question 50

is the 1.5 hp variable speed pump the one i should be using for a 3000 gallon in ground indoor splash pool? Currently there is a .75 hp constant rpm pump with 2" piping and runs at 12 psi. View answer

Asked 2 ´years ago | Pumps > CircuPool SmartFlo® Variable Speed Pool Pump - 1.7 THP

Browse by Topic

Tools